RESEARCH GROUP COMPUTED TOMOGRAPHY

UNIVERSITY OF APPLIED SCIENCES UPPER AUSTRIA - RESEARCH & DEVELOPMENT LTD.

Matching entries: 0
settings...
Reiter M, de Oliveira FB, Bartscher M, Gusenbauer C and Kastner J (2019), "Case Study of Empirical Beam Hardening Correction Methods for Dimensional X-ray Computed Tomography Using a Dedicated Multi-material Reference Standard", JOURNAL OF NONDESTRUCTIVE EVALUATION., March, 2019. Vol. 38(10)
BibTeX:
@article{2019_Reiter,
  author = {M. Reiter and F. Borges de Oliveira and M. Bartscher and C. Gusenbauer and J. Kastner},
  title = {Case Study of Empirical Beam Hardening Correction Methods for Dimensional X-ray Computed Tomography Using a Dedicated Multi-material Reference Standard},
  journal = {JOURNAL OF NONDESTRUCTIVE EVALUATION},
  year = {2019},
  volume = {38},
  number = {10}
}
Bajer J, Zaunschirm S, Šlapáková M, Zimina M, Plank B, Cieslar M and Kastner J (2018), "3D analysis of macresegregation in twin-roll cast AA3003 alloy before an after heat treatment", In Proceedings of the 27th International Conference on Metallurgy and Materials. Brno, Czech Republic, May, 2018. , pp. 1351-1357.
BibTeX:
@inproceedings{2018_Bajer,
  author = {J. Bajer and S. Zaunschirm and M. Šlapáková and M. Zimina and B. Plank and M. Cieslar and J. Kastner},
  title = {3D analysis of macresegregation in twin-roll cast AA3003 alloy before an after heat treatment},
  booktitle = {Proceedings of the 27th International Conference on Metallurgy and Materials},
  year = {2018},
  pages = {1351-1357}
}
BAJTOŠOVÁ L, Šlapáková M, Bajer J, KŘIVSKÁ B, GRYDIN O, Stolbchenko M, Zaunschirm S, Kastner J and Cieslar M (2018), "Impurities segregation in twin-soll cast Al-Mg-Sc-Zr material", In Proceedings of the 27th International Conference on Metallurgy and Materials. Brno, Czech Republic, May, 2018. , pp. 1455-1459.
BibTeX:
@inproceedings{2018_BAJTOSOVA,
  author = {L. BAJTOŠOVÁ and M. Šlapáková and J. Bajer and B. KŘIVSKÁ and O. GRYDIN and M. Stolbchenko and S. Zaunschirm and J. Kastner and M. Cieslar},
  title = {Impurities segregation in twin-soll cast Al-Mg-Sc-Zr material},
  booktitle = {Proceedings of the 27th International Conference on Metallurgy and Materials},
  year = {2018},
  pages = {1455-1459}
}
Bugelnig K, Germann H, Steffens T, Plank B, Wilde F, Boller E and Requena G (2018), "Optimized Segmentation of the 3D Microstructure in Cast Al-Si Piston Alloys", Practical Metallography., February, 2018. Vol. 55(4), pp. 223-243.
BibTeX:
@article{2018_Bugelnig,
  author = {K. Bugelnig and H. Germann and T. Steffens and B. Plank and F. Wilde and E. Boller and G. Requena},
  title = {Optimized Segmentation of the 3D Microstructure in Cast Al-Si Piston Alloys},
  journal = {Practical Metallography},
  year = {2018},
  volume = {55},
  number = {4},
  pages = {223-243}
}
Ecker J, Fürst C, Unterweger C, Plank B and Andreas H (2018), "3D computed tomography as Quality Control Tool in Advanced Composite Manufacturing", In Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). Wels, Austria, February, 2018. , pp. 7.
BibTeX:
@inproceedings{2018_Ecker,
  author = {J. Ecker and C. Fürst and C. Unterweger and B. Plank and H. Andreas},
  title = {3D computed tomography as Quality Control Tool in Advanced Composite Manufacturing},
  booktitle = {Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018)},
  year = {2018},
  pages = {7}
}
Elberfeld T, De Beenhouwer J, den Dekker AJ, Heinzl C and Sijbers J (2018), "Parametric Reconstruction of Glass Fiber-reinforced Polymer Composites from X-ray Projection Data---A Simulation Study", Journal of Nondestructive Evaluation., Jul, 2018. Vol. 37(3), pp. 62.
Abstract: We present a new approach to estimate geometry parameters of glass fibers in glass fiber-reinforced polymers from simulated X-ray micro-computed tomography scans. Traditionally, these parameters are estimated using a multi-step procedure including image reconstruction, pre-processing, segmentation and analysis of features of interest. Each step in this chain introduces errors that propagate through the pipeline and impair the accuracy of the estimated parameters. In the approach presented in this paper, we reconstruct volumes from a low number of projection angles using an iterative reconstruction technique and then estimate position, direction and length of the contained fibers incorporating a priori knowledge about their shape, modeled as a geometric representation, which is then optimized. Using simulation experiments, we show that our method can estimate those representations even in presence of noisy data and only very few projection angles available.
BibTeX:
@article{2018_Elberfeld,
  author = {Elberfeld, Tim and De Beenhouwer, Jan and den Dekker, Arnold J. and Heinzl, Christoph and Sijbers, Jan},
  title = {Parametric Reconstruction of Glass Fiber-reinforced Polymer Composites from X-ray Projection Data---A Simulation Study},
  journal = {Journal of Nondestructive Evaluation},
  year = {2018},
  volume = {37},
  number = {3},
  pages = {62},
  url = {https://doi.org/10.1007/s10921-018-0514-0},
  doi = {10.1007/s10921-018-0514-0}
}
Fíla T, Šleichrt J, Kytýř D, Kumpová I, Zlámal P, Rada V, Vavřík D, Koudelka P, Kulawiecova K and Senck S (2018), "Deformation analysis of the spongious sample in simulated physiological conditions based on in-situ compression, 4D computed tomography and fast readout detector", Journal of Instrumentation., November, 2018. Vol. 13, pp. 1-8.
BibTeX:
@article{2018_Fila,
  author = {T. Fíla and J. Šleichrt and D. Kytýř and I. Kumpová and P. Zlámal and V. Rada and D. Vavřík and P. Koudelka and K. Kulawiecova and S. Senck},
  title = {Deformation analysis of the spongious sample in simulated physiological conditions based on in-situ compression, 4D computed tomography and fast readout detector},
  journal = {Journal of Instrumentation},
  year = {2018},
  volume = {13},
  pages = {1-8}
}
Flitsch C, Kastner K, Bósa K and Flitsch C (2018), "Calibrating Traffic Simulation Models in SUMO Based upon Diverse Historical Real-Time Traffic Data", In SUMO 2018- Simulating Autonomous and Intermodal Transport Systems. Berlin, Germany, May, 2018. , pp. 25-42.
BibTeX:
@inproceedings{2018_Flitsch,
  author = {C. Flitsch and K. Kastner and K. Bósa and C. Flitsch},
  title = {Calibrating Traffic Simulation Models in SUMO Based upon Diverse Historical Real-Time Traffic Data},
  booktitle = {SUMO 2018- Simulating Autonomous and Intermodal Transport Systems},
  year = {2018},
  pages = {25-42}
}
Fröhler B, Heinzl C, Weissenböck J, Amirkhanov A, Arikan M and Kastner J (2018), "openiA: A Framework for Analyzing Industrial Computed Tomography Data", In Proceedings of the 12th European Conference on Non-destructive Testing. Göteborg, Sweden, June, 2018.
BibTeX:
@inproceedings{2018_Froehler,
  author = {B. Fröhler and C. Heinzl and J. Weissenböck and A. Amirkhanov and M. Arikan and J. Kastner},
  title = {openiA: A Framework for Analyzing Industrial Computed Tomography Data},
  booktitle = {Proceedings of the 12th European Conference on Non-destructive Testing},
  year = {2018}
}
Fröhler B, Möller T, Weissenböck J, Hege H, Kastner J and Heinzl C (2018), "Exploring Uncertainty in Image Segmentation Ensembles", In Proceedings of the 20th EG/VGTC Conference on Visualization. Brünn, Czech Republic, June, 2018.
BibTeX:
@inproceedings{2018_Froehlera,
  author = {B. Fröhler and T. Möller and J. Weissenböck and H. Hege and J. Kastner and C. Heinzl},
  title = {Exploring Uncertainty in Image Segmentation Ensembles},
  booktitle = {Proceedings of the 20th EG/VGTC Conference on Visualization},
  year = {2018}
}
Fürst C, Plank B, Senck S, Mihalic M and Unterweger C (2018), "Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites", In 18th European Conference on Composite Materials. Athens, Greece, June, 2018. , pp. 1-7.
BibTeX:
@inproceedings{2018_Fuerst,
  author = {C. Fürst and B. Plank and S. Senck and M. Mihalic and C. Unterweger},
  title = {Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites},
  booktitle = {18th European Conference on Composite Materials},
  year = {2018},
  pages = {1-7}
}
Glinz J, Weißenbacher P, Senck S, Schrempf A, Fürst D, Gastinger T, Huskic A, Reiter T and Kastner J (2018), "Determination of pore size distribution and finite element analysis of additively manufactured Ti pedicle screws using X-ray microcomputed tomography", In Proceedings of the 12th European Conference on Non-destructive Testing. Göteborg, Sweden, June, 2018. , pp. 1-8.
BibTeX:
@inproceedings{2018_Glinz,
  author = {J. Glinz and P. Weißenbacher and S. Senck and A. Schrempf and D. Fürst and T. Gastinger and A. Huskic and T. Reiter and J. Kastner},
  title = {Determination of pore size distribution and finite element analysis of additively manufactured Ti pedicle screws using X-ray microcomputed tomography},
  booktitle = {Proceedings of the 12th European Conference on Non-destructive Testing},
  year = {2018},
  pages = {1-8}
}
Glinz J, Senck S, Kastner J and Tondi G (2018), "Determination of pore size distribution in Tannin- and Lignin-based foams using Xray microcomputed tomography", In Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). Wels, Austria, February, 2018. , pp. 1-7.
BibTeX:
@inproceedings{2018_Glinza,
  author = {J. Glinz and S. Senck and J. Kastner and G. Tondi},
  title = {Determination of pore size distribution in Tannin- and Lignin-based foams using Xray microcomputed tomography},
  booktitle = {Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018)},
  year = {2018},
  pages = {1-7}
}
Gusenbauer C, Kastner J, Reiter M, Plank B, Salaberger D and Senck S (2018), "POROSITY DETERMINATION OF CARBON AND GLASS FIBRE REINFORCED POLYMERS USING PHASE-CONTRAST IMAGING", JOURNAL OF NONDESTRUCTIVE EVALUATION., December, 2018. Vol. 10921(4)
BibTeX:
@article{2018_Gusenbauer,
  author = {C. Gusenbauer and J. Kastner and M. Reiter and B. Plank and D. Salaberger and S. Senck},
  title = {POROSITY DETERMINATION OF CARBON AND GLASS FIBRE REINFORCED POLYMERS USING PHASE-CONTRAST IMAGING},
  journal = {JOURNAL OF NONDESTRUCTIVE EVALUATION},
  year = {2018},
  volume = {10921},
  number = {4}
}
Gusenbauer C, Reiter M, Salaberger D, Plank B and Kastner J (2018), "High-resolution X-ray computed tomography of inhomogeneous materials", In Proceedings of the 12th European Conference on Non-destructive Testing. Göteborg, Sweden, June, 2018. , pp. 1-8.
BibTeX:
@inproceedings{2018_Gusenbauera,
  author = {C. Gusenbauer and M. Reiter and D. Salaberger and B. Plank and J. Kastner},
  title = {High-resolution X-ray computed tomography of inhomogeneous materials},
  booktitle = {Proceedings of the 12th European Conference on Non-destructive Testing},
  year = {2018},
  pages = {1-8}
}
Hannesschläger C, Röper F, Wolfahrt M, Kucher G, Plank B and Kastner J (2018), "IN-SITU DAMAGE INVESTIGATION OF ADHESIVELY BONDED COMPOSITE REPAIRS", In 18th European Conference on Composite Materials. Athens, Greece, June, 2018.
BibTeX:
@inproceedings{2018_Hannesschlaeger,
  author = {C. Hannesschläger and F. Röper and M. Wolfahrt and G. Kucher and B. Plank and J. Kastner},
  title = {IN-SITU DAMAGE INVESTIGATION OF ADHESIVELY BONDED COMPOSITE REPAIRS},
  booktitle = {18th European Conference on Composite Materials},
  year = {2018}
}
Hannesschläger C, Rauchenzauner S, Gusenbauer C, Salaberger D and Kastner J (2018), "IN-SITU DAMAGE COMPARISON BETWEEN FABRIC-FABRIC AND FABRIC-UD BONDED CFRP", In Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). Wels, Austria, February, 2018.
BibTeX:
@inproceedings{2018_Hannesschlaegera,
  author = {C. Hannesschläger and S. Rauchenzauner and C. Gusenbauer and D. Salaberger and J. Kastner},
  title = {IN-SITU DAMAGE COMPARISON BETWEEN FABRIC-FABRIC AND FABRIC-UD BONDED CFRP},
  booktitle = {Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018)},
  year = {2018}
}
Heinzl C, Amirkhanov A and Kastner J (2018), "Processing, Analysis and Visualization of CT Data", In Industrial X-Ray Computed Tomography. , pp. 99-142. Springer.
BibTeX:
@incollection{2018_Heinzl,
  author = {C. Heinzl and A. Amirkhanov and J. Kastner},
  editor = {Carmignato S. and Dewulf W. and Leach R.},
  title = {Processing, Analysis and Visualization of CT Data},
  booktitle = {Industrial X-Ray Computed Tomography},
  publisher = {Springer},
  year = {2018},
  pages = {99-142}
}
Kastner J, Heinzl C and Glinz J (2018), "X-ray computed tomography for applications in industry and materials science", In Proceedings of the 57th Annual British Conference on Non-Destructive Testing. Nottingham, UK, United Kingdom of Great Britain and Northern Ireland, September, 2018. , pp. 1-12.
BibTeX:
@inproceedings{2018_Kastner,
  author = {J. Kastner and C. Heinzl and J. Glinz},
  title = {X-ray computed tomography for applications in industry and materials science},
  booktitle = {Proceedings of the 57th Annual British Conference on Non-Destructive Testing},
  year = {2018},
  pages = {1-12}
}
Kastner J, Gusenbauer C, Plank B, Glinz J and Senck S (2018), "Challenges for grating interferometer X-ray computed tomography for practical applications in industry", In Proceedings of the 12th European Conference on Non-destructive Testing. Göteborg, Sweden, June, 2018.
BibTeX:
@inproceedings{2018_Kastnera,
  author = {J. Kastner and C. Gusenbauer and B. Plank and J. Glinz and S. Senck},
  title = {Challenges for grating interferometer X-ray computed tomography for practical applications in industry},
  booktitle = {Proceedings of the 12th European Conference on Non-destructive Testing},
  year = {2018}
}
Kastner J and Heinzl C (2018), "X-Ray Tomography", In Handbook of Advanced Non-Destructive Evaluation. , pp. 1-72. Springer.
BibTeX:
@incollection{2018_Kastnerb,
  author = {J. Kastner and C. Heinzl},
  editor = {Ida N. and Meyendorf N.},
  title = {X-Ray Tomography},
  booktitle = {Handbook of Advanced Non-Destructive Evaluation},
  publisher = {Springer},
  year = {2018},
  pages = {1-72}
}
Kytýř D, Zlámal P, Koudelka P, Doktor T, Kumpová I, Vopálenský M, Heimel P, Mühleder S and Senck S (2018), "X-ray-based Microstructural Analysis of Low Atenuaing Biocompaible Porous Materials under Simulated Physiological Condiions", In Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). Wels, Austria, February, 2018. , pp. 1-7.
BibTeX:
@inproceedings{2018_Kytyr,
  author = {D. Kytýř and P. Zlámal and P. Koudelka and T. Doktor and I. Kumpová and M. Vopálenský and P. Heimel and S. Mühleder and S. Senck},
  title = {X-ray-based Microstructural Analysis of Low Atenuaing Biocompaible Porous Materials under Simulated Physiological Condiions},
  booktitle = {Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018)},
  year = {2018},
  pages = {1-7}
}
Obaton A, Lê M, Prezza V, Marlot D, Delvart P, Huskic A, Senck S, Mahé E and Cayron C (2018), "Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts", Welding in the World., June, 2018. , pp. 1049-1057.
BibTeX:
@article{2018_Obaton,
  author = {A. Obaton and M. Lê and V. Prezza and D. Marlot and P. Delvart and A. Huskic and S. Senck and E. Mahé and C. Cayron},
  title = {Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts},
  journal = {Welding in the World},
  year = {2018},
  pages = {1049-1057}
}
Plank B, Gusenbauer C, Senck S, Höller H and Kastner J (2018), "Porosity Determination in CFRP by means of X-ray Computed Tomography Methods", In Proceedings of the 12th European Conference on Non-destructive Testing. Göteborg, Sweden, June, 2018. , pp. 1-2.
BibTeX:
@inproceedings{2018_Plank,
  author = {B. Plank and C. Gusenbauer and S. Senck and H. Höller and J. Kastner},
  title = {Porosity Determination in CFRP by means of X-ray Computed Tomography Methods},
  booktitle = {Proceedings of the 12th European Conference on Non-destructive Testing},
  year = {2018},
  pages = {1-2}
}
Salaberger D, Lummerstorfer T, Jerabek M and Kastner J (2018), "Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography", In Proceedings of the 18th European Conference on Composite Materials. Athens, Greece, June, 2018. , pp. 1-6.
BibTeX:
@inproceedings{2018_Salaberger,
  author = {D. Salaberger and T. Lummerstorfer and M. Jerabek and J. Kastner},
  title = {Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography},
  booktitle = {Proceedings of the 18th European Conference on Composite Materials},
  year = {2018},
  pages = {1-6}
}
Salaberger D, Gerner S, Kahlen S and Kastner J (2018), "Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography", In Proceedings of the 12th European Conference on Non-destructive Testing. Göteborg, Sweden, June, 2018. , pp. 1-5.
BibTeX:
@inproceedings{2018_Salabergera,
  author = {D. Salaberger and S. Gerner and S. Kahlen and J. Kastner},
  title = {Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography},
  booktitle = {Proceedings of the 12th European Conference on Non-destructive Testing},
  year = {2018},
  pages = {1-5}
}
Schiwarth M, Weissenböck J, Plank B, Fröhler B, Heinzl C and Kastner J (2018), "Visual analysis of void and reinforcement characteristics in X-ray computed tomography dataset series of fiber-reinforced polymers", In Proceedings of the 13th International Conference on Textile Composites. Mailand, Italy, September, 2018. , pp. 12.
BibTeX:
@inproceedings{2018_Schiwarth,
  author = {M. Schiwarth and J. Weissenböck and B. Plank and B. Fröhler and C. Heinzl and J. Kastner},
  title = {Visual analysis of void and reinforcement characteristics in X-ray computed tomography dataset series of fiber-reinforced polymers},
  booktitle = {Proceedings of the 13th International Conference on Textile Composites},
  year = {2018},
  pages = {12}
}
Senck S, Scheerer M, Revol V, Plank B, Hannesschläger C, Gusenbauer C and Kastner J (2018), "Microcrack characterization in loaded CFRP laminates using quantitative two- and three-dimensional X-ray dark-field imaging", COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING., October, 2018. Vol. 115, pp. 206-2014.
BibTeX:
@article{2018_Senck,
  author = {S. Senck and M. Scheerer and V. Revol and B. Plank and C. Hannesschläger and C. Gusenbauer and J. Kastner},
  title = {Microcrack characterization in loaded CFRP laminates using quantitative two- and three-dimensional X-ray dark-field imaging},
  journal = {COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING},
  year = {2018},
  volume = {115},
  pages = {206-2014}
}
Senck S, Weißenbacher P, Kastner J, Reiter T, Hofstaetter S, Trieb K and Kranioti E (2018), "Assessment of trabecular microstructure and mechanical properties in the intermediate cuneiform of healthy and diabetic patients using microcomputed tomography", In 8th World Congress of Biomechanics. Dublin, Ireland, July, 2018.
BibTeX:
@inproceedings{2018_Sencka,
  author = {S. Senck and P. Weißenbacher and J. Kastner and T. Reiter and S. Hofstaetter and K. Trieb and E. Kranioti},
  title = {Assessment of trabecular microstructure and mechanical properties in the intermediate cuneiform of healthy and diabetic patients using microcomputed tomography},
  booktitle = {8th World Congress of Biomechanics},
  year = {2018}
}
Senck S, Vavřík D and Vopálenský M (2018), "Com3d-XCT: Competence Center for High-Resolution 3D X-ray Imaging", In Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). Wels, Austria, February, 2018. , pp. 1-1.
BibTeX:
@inproceedings{2018_Senckb,
  author = {S. Senck and D. Vavřík and M. Vopálenský},
  title = {Com3d-XCT: Competence Center for High-Resolution 3D X-ray Imaging},
  booktitle = {Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018)},
  year = {2018},
  pages = {1-1}
}
Senck S, Kain G, Lienbacher B, Barbu M and Petutschnigg A (2018), "Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling", CONSTRUCTION AND BUILDING MATERIALS., January, 2018. Vol. 164, pp. 308-316.
BibTeX:
@article{2018_Senckc,
  author = {S. Senck and G. Kain and B. Lienbacher and M. Barbu and A. Petutschnigg},
  title = {Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling},
  journal = {CONSTRUCTION AND BUILDING MATERIALS},
  year = {2018},
  volume = {164},
  pages = {308-316}
}
Trieb K, Meryk A, Senck S, Naismith E and Grubeck-Loebenstein B (2018), "Immunological and morphological analysis of heterotopic ossification differs to healthy controls", BMC Musculoskeletal Disorders., September, 2018. Vol. 19(327), pp. 1-7.
BibTeX:
@article{2018_Trieb,
  author = {K. Trieb and A. Meryk and S. Senck and E. Naismith and B. Grubeck-Loebenstein},
  title = {Immunological and morphological analysis of heterotopic ossification differs to healthy controls},
  journal = {BMC Musculoskeletal Disorders},
  year = {2018},
  volume = {19},
  number = {327},
  pages = {1-7}
}
Unterweger C, Plank B, Senck S, Mihalic M and Fürst C (2018), "Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics", In Carbon 2018. Madrid, Spanien, Spain, July, 2018. , pp. 1-2.
BibTeX:
@inproceedings{2018_Unterweger,
  author = {C. Unterweger and B. Plank and S. Senck and M. Mihalic and C. Fürst},
  title = {Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics},
  booktitle = {Carbon 2018},
  year = {2018},
  pages = {1-2}
}
Weissenböck J, Fröhler B, Gröller E, Kastner J and Heinzl C (2018), "Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves", IEEE Transactions on Visualization and Computer Graphics (TVCG)., August, 2018. , pp. 1-1.
BibTeX:
@article{2018_Weissenboeck,
  author = {J. Weissenböck and B. Fröhler and E. Gröller and J. Kastner and C. Heinzl},
  title = {Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves},
  journal = {IEEE Transactions on Visualization and Computer Graphics (TVCG)},
  year = {2018},
  pages = {1-1}
}
Weissenböck J, Arikan M, Salaberger D, Kastner J, Beenhouwer JD, Sijbers J, Rauchenzauner S, Raab-Wernig T, Gröller E and Heinzl C (2018), "Comparative Visualization of Orientation Tensors in Fiber-Reinforced Polymers", In Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018). Wels, Austria, February, 2018.
BibTeX:
@inproceedings{2018_Weissenboecka,
  author = {J. Weissenböck and M. Arikan and D. Salaberger and J. Kastner and J. De Beenhouwer and J. Sijbers and S. Rauchenzauner and T. Raab-Wernig and E. Gröller and C. Heinzl},
  title = {Comparative Visualization of Orientation Tensors in Fiber-Reinforced Polymers},
  booktitle = {Proceedings of the 8th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2018)},
  year = {2018}
}
Zimina M, Šlapáková M, Bohlen J, Letzig D, Kurz G, Zaunschirm S, Kastner J and Cieslar M (2018), "Center Line Segregation in Twin-Roll Cast AZ31 Magnesium Alloy", ACTA PHYSICA POLONICA A., September, 2018. Vol. 134(3), pp. 772-776.
BibTeX:
@article{2018_Zimina,
  author = {M. Zimina and M. Šlapáková and J. Bohlen and D. Letzig and G. Kurz and S. Zaunschirm and J. Kastner and M. Cieslar},
  title = {Center Line Segregation in Twin-Roll Cast AZ31 Magnesium Alloy},
  journal = {ACTA PHYSICA POLONICA A},
  year = {2018},
  volume = {134},
  number = {3},
  pages = {772-776}
}
Amirkhanov A, Salaberger D, Kastner J, Heinzl C and Gröller E (2017), "Comparison of Final Fracture Extraction Techniques for Interrupted In situ Tensile Tests of Glass Fiber Reinforced Polymers", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017.
BibTeX:
@inproceedings{2017_Amirkhanov,
  author = {A. Amirkhanov and D. Salaberger and J. Kastner and C. Heinzl and E. Gröller},
  title = {Comparison of Final Fracture Extraction Techniques for Interrupted In situ Tensile Tests of Glass Fiber Reinforced Polymers},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017}
}
Bhattacharya A, Weissenböck J, Wenger R, Amirkhanov A, Kastner J and Heinzl C (2017), "Interactive Exploration and Visualization using MetaTracts extracted from Carbon Fiber Reinforced Composites", IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS., August, 2017. Vol. 23(8), pp. 1988-2002.
BibTeX:
@article{2017_Bhattacharya,
  author = {A. Bhattacharya and J. Weissenböck and R. Wenger and A. Amirkhanov and J. Kastner and C. Heinzl},
  title = {Interactive Exploration and Visualization using MetaTracts extracted from Carbon Fiber Reinforced Composites},
  journal = {IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS},
  year = {2017},
  volume = {23},
  number = {8},
  pages = {1988-2002}
}
Bodner M, Schenk A, Salaberger D, Hochenauer C and Hacker V (2017), "Air Starvation Induced Degradation in Polymer Electrolyte Fuel Cells", Fuel Cells., February, 2017. Vol. 17(1), pp. 18-26.
BibTeX:
@article{2017_Bodner,
  author = {M. Bodner and A. Schenk and D. Salaberger and C. Hochenauer and V. Hacker},
  title = {Air Starvation Induced Degradation in Polymer Electrolyte Fuel Cells},
  journal = {Fuel Cells},
  year = {2017},
  volume = {17},
  number = {1},
  pages = {18-26}
}
Breitwieser S, Stockner G, Plank B, Gresslehner K and Hendorfer G (2017), "Comparison of different excitation and evaluation techniques for Infrared Thermography of Commercial Thermoelectric Modules", In Proceedings of ECT2017. Padua, Italy, September, 2017. , pp. 1.
BibTeX:
@inproceedings{2017_Breitwieser,
  author = {S. Breitwieser and G. Stockner and B. Plank and K. Gresslehner and G. Hendorfer},
  title = {Comparison of different excitation and evaluation techniques for Infrared Thermography of Commercial Thermoelectric Modules},
  booktitle = {Proceedings of ECT2017},
  year = {2017},
  pages = {1}
}
Fröhler B, Heinzl C, Kastner J and Möller T (2017), "Parameter-Space Exploration for Computed Tomography Image Analysis Algorithms", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017. , pp. 1-6.
BibTeX:
@inproceedings{2017_Froehler,
  author = {B. Fröhler and C. Heinzl and J. Kastner and T. Möller},
  title = {Parameter-Space Exploration for Computed Tomography Image Analysis Algorithms},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017},
  pages = {1-6}
}
Gusenbauer C, Reiter M, Plank B, Senck S, Hannesschläger C, Renner S, Kaufmann R and Kastner J (2017), "Multi-modal Talbot-Lau grating interferometer XCT data for the characterization of carbon fibre reinforced polymers with metal components", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017.
BibTeX:
@inproceedings{2017_Gusenbauer,
  author = {C. Gusenbauer and M. Reiter and B. Plank and S. Senck and C. Hannesschläger and S. Renner and R. Kaufmann and J. Kastner},
  title = {Multi-modal Talbot-Lau grating interferometer XCT data for the characterization of carbon fibre reinforced polymers with metal components},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017}
}
Gusenbauer C, Reiter M, Plank B, Mayr G, Renner S, Leiss-Holzinger E, Reitinger B, Burgholzer P, Barth M, Köhler B and Kastner J (2017), "Talbot-Lau grating interferometer XCT for porosity determination in CFRP with metal components in comparison to other NDT inspection methods", In 3rd International Conference on Tomography of Materials and Structures (ICTMS 2017). Lund, Sweden, June, 2017.
BibTeX:
@inproceedings{2017_Gusenbauera,
  author = {C. Gusenbauer and M. Reiter and B. Plank and G. Mayr and S. Renner and E. Leiss-Holzinger and B. Reitinger and P. Burgholzer and M. Barth and B. Köhler and J. Kastner},
  title = {Talbot-Lau grating interferometer XCT for porosity determination in CFRP with metal components in comparison to other NDT inspection methods},
  booktitle = {3rd International Conference on Tomography of Materials and Structures (ICTMS 2017)},
  year = {2017}
}
Heinzl C and Stappen S (2017), "STAR: Visual Computing in Materials Science", COMPUTER GRAPHICS FORUM., June, 2017. Vol. 36(3), pp. 647-666.
BibTeX:
@article{2017_Heinzl,
  author = {C. Heinzl and S. Stappen},
  title = {STAR: Visual Computing in Materials Science},
  journal = {COMPUTER GRAPHICS FORUM},
  year = {2017},
  volume = {36},
  number = {3},
  pages = {647-666}
}
Huskic A, Senck S, Obaton A, Lê M, Prezza V, Marlot D, Delvart P, Mahé E and Cayron C (2017), "Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts", In WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING. Metz Arsenal, France, May, 2017.
BibTeX:
@inproceedings{2017_Huskic,
  author = {A. Huskic and S. Senck and A. Obaton and M. Lê and V. Prezza and D. Marlot and P. Delvart and E. Mahé and C. Cayron},
  title = {Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts},
  booktitle = {WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING},
  year = {2017}
}
Janssens E, Beenhouwer JD, Sanctorum J, Senck S, Heinzl C and Sijbers J (2017), "Dual axis Dark Field Contrast Tomography for visualisation of scattering directions in a CFRP sample", In 4th conference on X-ray and neutron phase imaging with gratings (XNPIG2017). Zurich Switzerland, Switzerland, September, 2017. , pp. 1-2.
BibTeX:
@inproceedings{2017_Janssens,
  author = {E. Janssens and J. De Beenhouwer and J. Sanctorum and S. Senck and C. Heinzl and J. Sijbers},
  title = {Dual axis Dark Field Contrast Tomography for visualisation of scattering directions in a CFRP sample},
  booktitle = {4th conference on X-ray and neutron phase imaging with gratings (XNPIG2017)},
  year = {2017},
  pages = {1-2}
}
Janssens E, Senck S, Heinzl C, Kastner J, Beenhouwer JD and Sijbers J (2017), "Fast Reconstruction of CFRP X-ray Images based on a Neural Network Filtered Backprojection Approach", In Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017). Leuven, Belgium, February, 2017. , pp. 2.
BibTeX:
@inproceedings{2017_Janssensa,
  author = {E. Janssens and S. Senck and C. Heinzl and J. Kastner and J. De Beenhouwer and J. Sijbers},
  title = {Fast Reconstruction of CFRP X-ray Images based on a Neural Network Filtered Backprojection Approach},
  booktitle = {Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017)},
  year = {2017},
  pages = {2}
}
Jerabek M, Salaberger D, Amirkhanov A and Kastner J (2017), "Microstructure dependent damage mechanisms in 3D using X-ray tomography", In Proceedings of the 21st International conference on Composite Materials. Xian, China, August, 2017. , pp. 1-5.
BibTeX:
@inproceedings{2017_Jerabek,
  author = {M. Jerabek and D. Salaberger and A. Amirkhanov and J. Kastner},
  title = {Microstructure dependent damage mechanisms in 3D using X-ray tomography},
  booktitle = {Proceedings of the 21st International conference on Composite Materials},
  year = {2017},
  pages = {1-5}
}
Kastner J, Salaberger D, Heinzl C, Rao G and Gusenbauer C (2017), "High resolution X-ray computed tomography for non-destructive characterization and in-situ investigations", In APCNDT. Singapur, Singapore, November, 2017. , pp. 7.
BibTeX:
@inproceedings{2017_Kastner,
  author = {J. Kastner and D. Salaberger and C. Heinzl and G. Rao and C. Gusenbauer},
  title = {High resolution X-ray computed tomography for non-destructive characterization and in-situ investigations},
  booktitle = {APCNDT},
  year = {2017},
  pages = {7}
}
Kastner J (2017), "Micro-radiogrpaphy and computed tomography for material characterization", In 17. Seminar Aktuelle Fragen der Durchstrahlungsprüfung und des Strahlenschutzes. Dresden, Germany, March, 2017.
BibTeX:
@inproceedings{2017_Kastnera,
  author = {J. Kastner},
  title = {Micro-radiogrpaphy and computed tomography for material characterization},
  booktitle = {17. Seminar Aktuelle Fragen der Durchstrahlungsprüfung und des Strahlenschutzes},
  year = {2017}
}
Kastner J, Heinzl C, Plank B, Salaberger D, Gusenbauer C and Senck S (2017), "New X-ray computed tomography methods for research and industry", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017.
BibTeX:
@inproceedings{2017_Kastnerb,
  author = {J. Kastner and C. Heinzl and B. Plank and D. Salaberger and C. Gusenbauer and S. Senck},
  title = {New X-ray computed tomography methods for research and industry},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017}
}
Kastner J, Gusenbauer C, Senck S and Rao G (2017), "Talbot-Lau grating interferometer μXCT for quantitative characterization of polymeric structures by using phase and dark field contrast", In APCNDT. Singapur, Singapore, November, 2017.
BibTeX:
@inproceedings{2017_Kastnerc,
  author = {J. Kastner and C. Gusenbauer and S. Senck and G. Rao},
  title = {Talbot-Lau grating interferometer μXCT for quantitative characterization of polymeric structures by using phase and dark field contrast},
  booktitle = {APCNDT},
  year = {2017}
}
Mayr G, Gruber J, Schedlberger T, Gusenbauer C and Hendorfer G (2017), "Beurteilung von belastungsbedingten Schädigungszuständen in CFK mit Spannungskonzentrationen mithilfe der Puls-Thermographie", In Proceedings Thermographie-Kolloquium 2017. Berlin, Germany, September, 2017. , pp. 9.
BibTeX:
@inproceedings{2017_Mayr,
  author = {G. Mayr and J. Gruber and T. Schedlberger and C. Gusenbauer and G. Hendorfer},
  title = {Beurteilung von belastungsbedingten Schädigungszuständen in CFK mit Spannungskonzentrationen mithilfe der Puls-Thermographie},
  booktitle = {Proceedings Thermographie-Kolloquium 2017},
  year = {2017},
  pages = {9}
}
Plank B, Salaberger D, Rao G, Amirkhanov A and Kastner J (2017), "4D X-ray computed tomography by using conventional laboratory CTs: possibilities and limitations", In DGZfP- Annual Conference 2017. Koblenz, Germany, May, 2017. , pp. 9.
BibTeX:
@inproceedings{2017_Plank,
  author = {B. Plank and D. Salaberger and G. Rao and A. Amirkhanov and J. Kastner},
  title = {4D X-ray computed tomography by using conventional laboratory CTs: possibilities and limitations},
  booktitle = {DGZfP- Annual Conference 2017},
  year = {2017},
  pages = {9}
}
Prade F, Schaff F, Senck S, Prade F and Pfeiffer F (2017), "Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography", NDT & E INTERNATIONAL., February, 2017. Vol. 86
BibTeX:
@article{2017_Prade,
  author = {F. Prade and F. Schaff and S. Senck and F. Prade and F. Pfeiffer},
  title = {Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography},
  journal = {NDT & E INTERNATIONAL},
  year = {2017},
  volume = {86}
}
Rao G, Amirkhanov A, Salaberger D, Kastner J and Heinzl C (2017), "Damage characterization in SFRP using X-ray computed tomography after application of incremental and interrupted in situ quasi static tensile loading", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017.
BibTeX:
@inproceedings{2017_Rao,
  author = {G. Rao and A. Amirkhanov and D. Salaberger and J. Kastner and C. Heinzl},
  title = {Damage characterization in SFRP using X-ray computed tomography after application of incremental and interrupted in situ quasi static tensile loading},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017}
}
Reiter M, Gusenbauer C and Kastner J (2017), "Distance measurements on inaccessible wires in plastic parts with X-ray computed tomography", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017.
BibTeX:
@inproceedings{2017_Reiter,
  author = {M. Reiter and C. Gusenbauer and J. Kastner},
  title = {Distance measurements on inaccessible wires in plastic parts with X-ray computed tomography},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017}
}
Sanctorum J, Janssens E, den Dekker A, Senck S, Heinzl C, Beenhouwer JD and Sijbers J (2017), "A workflow to reconstruct grating-based X-ray phase contrast CT images: application to CFRP samples", In Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017). Leuven, Belgium, February, 2017. , pp. 1-2.
BibTeX:
@inproceedings{2017_Sanctorum,
  author = {J. Sanctorum and E. Janssens and A. den Dekker and S. Senck and C. Heinzl and J. De Beenhouwer and J. Sijbers},
  title = {A workflow to reconstruct grating-based X-ray phase contrast CT images: application to CFRP samples},
  booktitle = {Proceedings of the 7th Conference on Industrial Computed Tomography, Leuven, Belgium (iCT 2017)},
  year = {2017},
  pages = {1-2}
}
Schützenhöfer W, Decker C, Plank B and Plesiutschnig E (2017), "ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS", In IFM 2017 – 20th International Forgemasters Meeting 2017. Graz, Austria, August, 2017. , pp. 10.
BibTeX:
@inproceedings{2017_Schuetzenhoefer,
  author = {W. Schützenhöfer and C. Decker and B. Plank and E. Plesiutschnig},
  title = {ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS},
  booktitle = {IFM 2017 – 20th International Forgemasters Meeting 2017},
  year = {2017},
  pages = {10}
}
Senck S, Plank B, Kastner J, Revol V, Dobes K and Scheerer M (2017), "Non-destructive evaluation of defects in polymer matrix composites for aerospace applications using X-ray Talbot-Lau interferometry and micro CT", In 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum. Grapevine, United States of America, January, 2017. , pp. 1-9.
BibTeX:
@inproceedings{2017_Senck,
  author = {S. Senck and B. Plank and J. Kastner and V. Revol and K. Dobes and M. Scheerer},
  title = {Non-destructive evaluation of defects in polymer matrix composites for aerospace applications using X-ray Talbot-Lau interferometry and micro CT},
  booktitle = {58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA SciTech Forum},
  year = {2017},
  pages = {1-9}
}
Senck S, Plank B, Gusenbauer C, Salaberger D, Santer W and Kastner J (2017), "Three-dimensional characterization of polymer foams using X-ray dark-field imaging", In Proceedings Industrial Computed Tomography (iCT2017). Leuven, Belgium, February, 2017. , pp. 1-7.
BibTeX:
@inproceedings{2017_Sencka,
  author = {S. Senck and B. Plank and C. Gusenbauer and D. Salaberger and W. Santer and J. Kastner},
  title = {Three-dimensional characterization of polymer foams using X-ray dark-field imaging},
  booktitle = {Proceedings Industrial Computed Tomography (iCT2017)},
  year = {2017},
  pages = {1-7}
}
Trieb K and Senck S (2017), "Quantification of cortical and cartilage thickness in the proximal tibia of osteoarthritis patients using micro-computed tomography", In The European Orthopaedic Research Society (EORS) . München, Germany, September, 2017. , pp. 1-1.
BibTeX:
@inproceedings{2017_Trieb,
  author = {K. Trieb and S. Senck},
  title = {Quantification of cortical and cartilage thickness in the proximal tibia of osteoarthritis patients using micro-computed tomography},
  booktitle = {The European Orthopaedic Research Society (EORS) },
  year = {2017},
  pages = {1-1}
}
Weissenböck J, Senck S, Plank B, Heinzl C and Kastner J (2017), "Porosity Evaluation of Carbon Fiber-Reinforced Polymers with Porosity Analyzer", In 3rd International Conference on Tomography of Materials and Structures (ICTMS 2017). Lund, Sweden, June, 2017. , pp. 1.
BibTeX:
@inproceedings{2017_Weissenboeck,
  author = {J. Weissenböck and S. Senck and B. Plank and C. Heinzl and J. Kastner},
  title = {Porosity Evaluation of Carbon Fiber-Reinforced Polymers with Porosity Analyzer},
  booktitle = {3rd International Conference on Tomography of Materials and Structures (ICTMS 2017)},
  year = {2017},
  pages = {1}
}
Weissenböck J, Senck S, Plank B, Heinzl C and Kastner J (2017), "Porosity Evaluation of Carbon Fiber-Reinforced Polymers with Porosity Analyzer", In 3rd International Conference on Tomography of Materials and Structures (ICTMS 2017). Lund, Sweden, June, 2017. , pp. 2.
BibTeX:
@inproceedings{2017_Weissenboecka,
  author = {J. Weissenböck and S. Senck and B. Plank and C. Heinzl and J. Kastner},
  title = {Porosity Evaluation of Carbon Fiber-Reinforced Polymers with Porosity Analyzer},
  booktitle = {3rd International Conference on Tomography of Materials and Structures (ICTMS 2017)},
  year = {2017},
  pages = {2}
}
Amirkhanov A, Amirkhanov A, Salaberger D, Kastner J, Gröller E and Heinzl C (2016), "Visual Analysis of Defects in Glass Fiber Reinforced Polymers for 4DCT Interrupted In situ Tests", COMPUTER GRAPHICS FORUM., April, 2016. Vol. 35(3), pp. 201-210.
BibTeX:
@article{2016_Amirkhanov,
  author = {A. Amirkhanov and A. Amirkhanov and D. Salaberger and J. Kastner and E. Gröller and C. Heinzl},
  title = {Visual Analysis of Defects in Glass Fiber Reinforced Polymers for 4DCT Interrupted In situ Tests},
  journal = {COMPUTER GRAPHICS FORUM},
  year = {2016},
  volume = {35},
  number = {3},
  pages = {201-210}
}
Breitwieser S, Greßlehner K, Plank B and Hendorfer G (2016), "FAILURE DETECTION IN COMMERCIAL THERMOELECTRIC MODULES USING INFRARED THERMOGRAPHY", In Proceedings of 6th World Sustainable Energy Forum (WSEF2016). Vienna, Austria, October, 2016. , pp. 9.
BibTeX:
@inproceedings{2016_Breitwieser,
  author = {S. Breitwieser and K. Greßlehner and B. Plank and G. Hendorfer},
  title = {FAILURE DETECTION IN COMMERCIAL THERMOELECTRIC MODULES USING INFRARED THERMOGRAPHY},
  booktitle = {Proceedings of 6th World Sustainable Energy Forum (WSEF2016)},
  year = {2016},
  pages = {9}
}
Breitwieser S, Greßlehner K, Plank B and Hendorfer G (2016), "FAILURE DETECTION IN COMMERCIAL THERMOELECTRIC MODULES USING INFRARED THERMOGRAPHY", In Conference Book of Austrian Physical Society (ÖPG-Meeting 2016). Vienna, Austria, September, 2016. , pp. 261-262.
BibTeX:
@inproceedings{2016_Breitwiesera,
  author = {S. Breitwieser and K. Greßlehner and B. Plank and G. Hendorfer},
  title = {FAILURE DETECTION IN COMMERCIAL THERMOELECTRIC MODULES USING INFRARED THERMOGRAPHY},
  booktitle = {Conference Book of Austrian Physical Society (ÖPG-Meeting 2016)},
  year = {2016},
  pages = {261-262}
}
Fröhler B, Möller T and Heinzl C (2016), "GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms", Computer Graphics Forum., June, 2016. Vol. 35(3), pp. 191-200.
BibTeX:
@article{2016_Froehler,
  author = {Bernhard Fröhler and Torsten Möller and Christoph Heinzl},
  title = {GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms},
  journal = {Computer Graphics Forum},
  year = {2016},
  volume = {35},
  number = {3},
  pages = {191--200},
  doi = {10.1111/cgf.12895}
}
Gsellmann G, Jerabek M and Salaberger D (2016), "Comparison of predicted and measured fiber orientations in injection molded parts", In 6th Conference on Industrial Computed Tomography. Wels, Austria, February, 2016.
BibTeX:
@inproceedings{2016_Gsellmann,
  author = {G. Gsellmann and M. Jerabek and D. Salaberger},
  title = {Comparison of predicted and measured fiber orientations in injection molded parts},
  booktitle = {6th Conference on Industrial Computed Tomography},
  year = {2016}
}
Gusenbauer C, Leiss-Holzinger E, Senck S, Mathmann K, Kastner J, Hunger S and Birkfellner W (2016), "Characterization of medical and biological samples with a Talbot–Lau grating interferometer μXCT in comparison to reference methods", Case Studies in Nondestructive Testing and Evaluation., November, 2016. Vol. 6, pp. 30-38.
BibTeX:
@article{2016_Gusenbauer,
  author = {C. Gusenbauer and E. Leiss-Holzinger and S. Senck and K. Mathmann and J. Kastner and S. Hunger and W. Birkfellner},
  title = {Characterization of medical and biological samples with a Talbot–Lau grating interferometer μXCT in comparison to reference methods},
  journal = {Case Studies in Nondestructive Testing and Evaluation},
  year = {2016},
  volume = {6},
  pages = {30-38}
}
Gusenbauer C, Hunger S, Senck S and Kastner J (2016), "Characterization of Tooth Samples with a Talbot-Lau Grating Interferometer μXCT Desktop Device", In Proceedings 4th International Conference on Image Formation in X-Ray Computed Tomography. Bamberg, Germany, July, 2016. , pp. 371-374.
BibTeX:
@inproceedings{2016_Gusenbauera,
  author = {C. Gusenbauer and S. Hunger and S. Senck and J. Kastner},
  title = {Characterization of Tooth Samples with a Talbot-Lau Grating Interferometer μXCT Desktop Device},
  booktitle = {Proceedings 4th International Conference on Image Formation in X-Ray Computed Tomography},
  year = {2016},
  pages = {371-374}
}
Gusenbauer C, Reiter M, Salaberger D and Kastner J (2016), "Comparison of Metal Artefact Reduction Algorithms from Medicine Applied to Industrial XCT Applications", In 19th World Conference on Non-Destructive Testing, WCNDT 2016. München, Germany, June, 2016.
BibTeX:
@inproceedings{2016_Gusenbauerb,
  author = {C. Gusenbauer and M. Reiter and D. Salaberger and J. Kastner},
  title = {Comparison of Metal Artefact Reduction Algorithms from Medicine Applied to Industrial XCT Applications},
  booktitle = {19th World Conference on Non-Destructive Testing, WCNDT 2016},
  year = {2016}
}
Gusenbauer C, Reiter M, Kastner J and Klösch G (2016), "Detection of Non-Metallic Inclusions in Quenched and Tempered Steel Bars by XCT and after Fatigue Life Testing", steel research international., March, 2016. Vol. 87(3), pp. 386-393.
BibTeX:
@article{2016_Gusenbauerc,
  author = {C. Gusenbauer and M. Reiter and J. Kastner and G. Klösch},
  title = {Detection of Non-Metallic Inclusions in Quenched and Tempered Steel Bars by XCT and after Fatigue Life Testing},
  journal = {steel research international},
  year = {2016},
  volume = {87},
  number = {3},
  pages = {386-393}
}
Haubner R, Strobl S, Zbiral J, Gusenbauer C and Pintz U (2016), "Metallurgical Characterization of A Coated Roman Iron Coin By Analytical Investigations", ARCHAEOMETRY., June, 2016. Vol. 58(3), pp. 441-452.
BibTeX:
@article{2016_Haubner,
  author = {R. Haubner and S. Strobl and J. Zbiral and C. Gusenbauer and U. Pintz},
  title = {Metallurgical Characterization of A Coated Roman Iron Coin By Analytical Investigations},
  journal = {ARCHAEOMETRY},
  year = {2016},
  volume = {58},
  number = {3},
  pages = {441-452}
}
Kain G, Lienbacher B, Barbu M, Plank B, Richter K and Petutschnigg A (2016), "Evaluation of relationships between particle orientation and thermal conductivity in bark insulation board by means of CT and discrete modeling", Case Studies in Nondestructive Testing and Evaluation., March, 2016. Vol. 6(2), pp. 21-29.
BibTeX:
@article{2016_Kain,
  author = {G. Kain and B. Lienbacher and M. Barbu and B. Plank and K. Richter and A. Petutschnigg},
  title = {Evaluation of relationships between particle orientation and thermal conductivity in bark insulation board by means of CT and discrete modeling},
  journal = {Case Studies in Nondestructive Testing and Evaluation},
  year = {2016},
  volume = {6},
  number = {2},
  pages = {21-29}
}
Kain G, Lienbacher B, Barbu M, Plank B, Richter K and Petutschnigg A (2016), "Tree bark insulation panels for special purpose insulation: evaluation and discrete modeling of structure property relationships", In Proceedings of World Conference on Timber Engineering. Vienna, Austria, Austria, August, 2016. , pp. 8.
BibTeX:
@inproceedings{2016_Kaina,
  author = {G. Kain and B. Lienbacher and M. Barbu and B. Plank and K. Richter and A. Petutschnigg},
  title = {Tree bark insulation panels for special purpose insulation: evaluation and discrete modeling of structure property relationships},
  booktitle = {Proceedings of World Conference on Timber Engineering},
  year = {2016},
  pages = {8}
}
Kastner J, Plank B and Rao G (2016), "Evaluation of a Testpiece for Porosity in Carbon Fibre Reinforced Polymers", In 19th World Conference on Non-Destructive Testing, WCNDT 2016. München, Germany, June, 2016. , pp. 1-7.
BibTeX:
@inproceedings{2016_Kastner,
  author = {J. Kastner and B. Plank and G. Rao},
  title = {Evaluation of a Testpiece for Porosity in Carbon Fibre Reinforced Polymers},
  booktitle = {19th World Conference on Non-Destructive Testing, WCNDT 2016},
  year = {2016},
  pages = {1-7}
}
Kastner J, Senck S, Plank B, Salaberger D, Rao G and Gusenbauer C (2016), "THREE-DIMENSIONAL CHARACTERIZATION OF STRUCTURE AND DAMAGE OF POLYMERS USING A TALBOT-LAU GRATING INTERFEROMETER μ-XCT", In ECCM17 - 17th European Conference on Composite Materials. Munich, Germany, June, 2016. , pp. 1-8.
BibTeX:
@inproceedings{2016_Kastnera,
  author = {J. Kastner and S. Senck and B. Plank and D. Salaberger and G. Rao and C. Gusenbauer},
  title = {THREE-DIMENSIONAL CHARACTERIZATION OF STRUCTURE AND DAMAGE OF POLYMERS USING A TALBOT-LAU GRATING INTERFEROMETER μ-XCT},
  booktitle = {ECCM17 - 17th European Conference on Composite Materials},
  year = {2016},
  pages = {1-8}
}
Margherita C, Sahra T, Wiltschke-Schrotta K, Senck S, Oxilia G, Sorrentino R, Mancuso G, Gruppioni G, Lindner R, Hublin J and Benazzi S (2016), "A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth", JOURNAL OF HUMAN EVOLUTION., March, 2016. Vol. 93(1), pp. 120-125.
BibTeX:
@article{2016_Margherita,
  author = {C. Margherita and T. Sahra and K. Wiltschke-Schrotta and S. Senck and G. Oxilia and R. Sorrentino and G. Mancuso and G. Gruppioni and R. Lindner and J. Hublin and S. Benazzi},
  title = {A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth},
  journal = {JOURNAL OF HUMAN EVOLUTION},
  year = {2016},
  volume = {93},
  number = {1},
  pages = {120-125}
}
Mathmann K, Bürger V, Fröhler B, Heinzl C and Kastner J (2016), "Imaging of the microstructure of wheat dough by the complementary rendering of data from x-ray computed tomography and confocal laser scanning microscopy", In 30th EFFoST International Conference. Vienna, Austria, November, 2016. , pp. 1.
BibTeX:
@inproceedings{2016_Mathmann,
  author = {K. Mathmann and V. Bürger and B. Fröhler and C. Heinzl and J. Kastner},
  title = {Imaging of the microstructure of wheat dough by the complementary rendering of data from x-ray computed tomography and confocal laser scanning microscopy},
  booktitle = {30th EFFoST International Conference},
  year = {2016},
  pages = {1}
}
Mathmann K, Zauner H, Heinzl C and Kastner J (2016), "Multi-Modal Imaging as a Promising Approach to the Understanding of Wheat-Dough Microstructures", In 6th Conference on Industrial Computed Tomography. Wels, Austria, February, 2016. , pp. 162-163.
BibTeX:
@inproceedings{2016_Mathmanna,
  author = {K. Mathmann and H. Zauner and C. Heinzl and J. Kastner},
  title = {Multi-Modal Imaging as a Promising Approach to the Understanding of Wheat-Dough Microstructures},
  booktitle = {6th Conference on Industrial Computed Tomography},
  year = {2016},
  pages = {162-163}
}
Plank T, Helfert M and Hofer P (2016), "Supporting the Comprehension of Interactive Visualizations", In Poster Proceedings IEEE Information Visualization (InfoVis). Baltimore, MD, United States of America, October, 2016.
BibTeX:
@inproceedings{2016_Plank,
  author = {T. Plank and M. Helfert and P. Hofer},
  title = {Supporting the Comprehension of Interactive Visualizations},
  booktitle = {Poster Proceedings IEEE Information Visualization (InfoVis)},
  year = {2016}
}
Plank B, Helmus R, Gschwandtner M, Hinterhölzl R and Kastner J (2016), "In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography", In 19th World Conference on Non-Destructive Testing, WCNDT 2016. München, Germany, June, 2016. , pp. 1-8.
BibTeX:
@inproceedings{2016_Planka,
  author = {B. Plank and R. Helmus and M. Gschwandtner and R. Hinterhölzl and J. Kastner},
  title = {In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography},
  booktitle = {19th World Conference on Non-Destructive Testing, WCNDT 2016},
  year = {2016},
  pages = {1-8}
}
Rao G, Plank B and Kastner J (2016), "Comparison of different segmentation methods for porosity evaluation in CFRP-reference samples with real porosity samples", In 6th Conference on Industrial Computed Tomography. Wels, Austria, February, 2016. , pp. 1-8.
BibTeX:
@inproceedings{2016_Rao,
  author = {G. Rao and B. Plank and J. Kastner},
  title = {Comparison of different segmentation methods for porosity evaluation in CFRP-reference samples with real porosity samples},
  booktitle = {6th Conference on Industrial Computed Tomography},
  year = {2016},
  pages = {1-8}
}
Rao G, Plank B, Heinzl C and Kastner J (2016), "Quantitative evaluation of induced porosity reference samples implemented by drill hole in CFRP using XCT and various segmentation parameters", In ECCM17 - 17th European Conference on Composite Materials. Munich, Germany, June, 2016. , pp. 1-11.
BibTeX:
@inproceedings{2016_Raoa,
  author = {G. Rao and B. Plank and C. Heinzl and J. Kastner},
  title = {Quantitative evaluation of induced porosity reference samples implemented by drill hole in CFRP using XCT and various segmentation parameters},
  booktitle = {ECCM17 - 17th European Conference on Composite Materials},
  year = {2016},
  pages = {1-11}
}
Rao G, Gusenbauer C, Senck S and Kastner J (2016), "Three dimensional visualisation of barley corn seed and fish tissue using Talbot Lau grating interferometer.", In Bruker micro CT user meeting 2016. Luxembourg, Luxembourg, May, 2016. , pp. 1-5.
BibTeX:
@inproceedings{2016_Raob,
  author = {G. Rao and C. Gusenbauer and S. Senck and J. Kastner},
  title = {Three dimensional visualisation of barley corn seed and fish tissue using Talbot Lau grating interferometer.},
  booktitle = {Bruker micro CT user meeting 2016},
  year = {2016},
  pages = {1-5}
}
Reiter M and Kastner J (2016), "Investigation towards simulation-based determination of measurement uncertainties for X-ray computed tomography", In Proceedings 4th International Conference on Image Formation in X-Ray Computed Tomography. Bamberg, Germany, July, 2016.
BibTeX:
@inproceedings{2016_Reiter,
  author = {M. Reiter and J. Kastner},
  title = {Investigation towards simulation-based determination of measurement uncertainties for X-ray computed tomography},
  booktitle = {Proceedings 4th International Conference on Image Formation in X-Ray Computed Tomography},
  year = {2016}
}
Reiter M, Erler M, Kuhn C, Gusenbauer C and Kastner J (2016), "SimCT: a simulation tool for X-ray imaging", In 6th Conference on Industrial Computed Tomography. Wels, Austria, February, 2016.
BibTeX:
@inproceedings{2016_Reitera,
  author = {M. Reiter and M. Erler and C. Kuhn and C. Gusenbauer and J. Kastner},
  title = {SimCT: a simulation tool for X-ray imaging},
  booktitle = {6th Conference on Industrial Computed Tomography},
  year = {2016}
}
Salaberger D, Jerabek M, Hannesschläger C and Kastner J (2016), "SINGLE FIBRE CHARACTERISATION OF CURVED FIBRES WITHIN A THERMOPLASTIC MATRIX USING X-RAY TOMOGRAPHY", In ECCM17 - 17th European Conference on Composite Materials. Munich, Germany, June, 2016.
BibTeX:
@inproceedings{2016_Salaberger,
  author = {D. Salaberger and M. Jerabek and C. Hannesschläger and J. Kastner},
  title = {SINGLE FIBRE CHARACTERISATION OF CURVED FIBRES WITHIN A THERMOPLASTIC MATRIX USING X-RAY TOMOGRAPHY},
  booktitle = {ECCM17 - 17th European Conference on Composite Materials},
  year = {2016}
}
Schützenhöfer W, Decker C, Plank B and Plesiutschnig E (2016), "EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS", In Proceedings of 10th International TOOL Conference (TOOL 2016). Bratislava, Slovakia, October, 2016. , pp. 10.
BibTeX:
@inproceedings{2016_Schuetzenhoefer,
  author = {W. Schützenhöfer and C. Decker and B. Plank and E. Plesiutschnig},
  title = {EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS},
  booktitle = {Proceedings of 10th International TOOL Conference (TOOL 2016)},
  year = {2016},
  pages = {10}
}
Senck S, Salaberger D, Gusenbauer C, Plank B, Rao G and Kastner J (2016), "Talbot-Lau grating interferometer XCT for the quantitative characterization of damage in polymers after impact and static tensile testing", In 19th World Conference on Non-Destructive Testing, WCNDT 2016. München, Germany, June, 2016. , pp. 1-8.
BibTeX:
@inproceedings{2016_Sencka,
  author = {S. Senck and D. Salaberger and C. Gusenbauer and B. Plank and G. Rao and J. Kastner},
  title = {Talbot-Lau grating interferometer XCT for the quantitative characterization of damage in polymers after impact and static tensile testing},
  booktitle = {19th World Conference on Non-Destructive Testing, WCNDT 2016},
  year = {2016},
  pages = {1-8}
}
Šlapáková M, Zimina M, Zaunschirm S, Kastner J, Bajer J and Cieslar M (2016), "3D analysis of macrosegregation in twin-roll cast AA3003 alloy", MATERIALS CHARACTERIZATION., August, 2016. Vol. 118(118), pp. 44-49.
BibTeX:
@article{2016_Slapakova,
  author = {M. Šlapáková and M. Zimina and S. Zaunschirm and J. Kastner and J. Bajer and M. Cieslar},
  title = {3D analysis of macrosegregation in twin-roll cast AA3003 alloy},
  journal = {MATERIALS CHARACTERIZATION},
  year = {2016},
  volume = {118},
  number = {118},
  pages = {44-49}
}
Straumit I, Hahn C, Winterstein E, Plank B, Lomov S and Wevers M (2016), "Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images", COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING., February, 2016. Vol. 81(1), pp. 289-295.
BibTeX:
@article{2016_Straumit,
  author = {I. Straumit and C. Hahn and E. Winterstein and B. Plank and S. Lomov and M. Wevers},
  title = {Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images},
  journal = {COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING},
  year = {2016},
  volume = {81},
  number = {1},
  pages = {289-295}
}
Tocheri M, Dommain R, McFarlin S, Burnett S, Case D, Orr C, Roach N, Villmoare B, Eriksen A, Kalthoff D, Senck S, Assefa Z, Groves C and Jungers W (2016), "The evolutionary origin and population history of the grauer gorilla", AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY., January, 2016. Vol. 159(1), pp. 4-18.
BibTeX:
@article{2016_Tocheri,
  author = {M. Tocheri and R. Dommain and S. McFarlin and S. Burnett and D. Case and C. Orr and N. Roach and B. Villmoare and A. Eriksen and D. Kalthoff and S. Senck and Z. Assefa and C. Groves and W. Jungers},
  title = {The evolutionary origin and population history of the grauer gorilla},
  journal = {AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY},
  year = {2016},
  volume = {159},
  number = {1},
  pages = {4-18}
}
Villarraga-Gómez H, Amirkhanov A and Smith S (2016), "A Study of Uncertainties from Workpiece Tilt in Dimensional Computed Tomography", In Proceedings 31st ASPE Annual Meeting. Portland/OR, USA, United States of America, October, 2016. , pp. 365-371.
BibTeX:
@inproceedings{2016_Villarraga-Gomez,
  author = {H. Villarraga-Gómez and A. Amirkhanov and S. Smith},
  title = {A Study of Uncertainties from Workpiece Tilt in Dimensional Computed Tomography},
  booktitle = {Proceedings 31st ASPE Annual Meeting},
  year = {2016},
  pages = {365-371}
}
Weissenböck J, Amirkhanov A, Gröller E, Kastner J and Heinzl C (2016), "PorosityAnalyzer: Visual Analysis and Evaluation of Segmentation Pipelines to Determine the Porosity in Fiber-Reinforced Polymers", In IEEE Conference on Visual Analytics Science and Technology (IEEE VAST 2016). Baltimore, United States of America, October, 2016. , pp. 101-110.
BibTeX:
@inproceedings{2016_Weissenboeck,
  author = {J. Weissenböck and A. Amirkhanov and E. Gröller and J. Kastner and C. Heinzl},
  title = {PorosityAnalyzer: Visual Analysis and Evaluation of Segmentation Pipelines to Determine the Porosity in Fiber-Reinforced Polymers},
  booktitle = {IEEE Conference on Visual Analytics Science and Technology (IEEE VAST 2016)},
  year = {2016},
  pages = {101-110}
}
Weissenböck J, Bhattacharya A, Plank B, Heinzl C and Kastner J (2016), "Visual classification of braided and woven fiber bundles in X-ray computed tomography scanned carbon fiber reinforced polymer specimens", Case Studies in Nondestructive Testing and Evaluation., May, 2016. Vol. 6(3), pp. 39-46.
BibTeX:
@article{2016_Weissenboecka,
  author = {J. Weissenböck and A. Bhattacharya and B. Plank and C. Heinzl and J. Kastner},
  title = {Visual classification of braided and woven fiber bundles in X-ray computed tomography scanned carbon fiber reinforced polymer specimens},
  journal = {Case Studies in Nondestructive Testing and Evaluation},
  year = {2016},
  volume = {6},
  number = {3},
  pages = {39-46}
}
Affenzeller C, Gusenbauer C, Reiter M and Kastner J (2015), "Measurement uncertainty evaluation of an X-ray computed tomography system", In Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015). Ghent, Belgium, June, 2015. , pp. 10.
BibTeX:
@inproceedings{2015_Affenzeller,
  author = {C. Affenzeller and C. Gusenbauer and M. Reiter and J. Kastner},
  title = {Measurement uncertainty evaluation of an X-ray computed tomography system},
  booktitle = {Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015)},
  year = {2015},
  pages = {10}
}
Bhattacharya A, Heinzl C, Amirkhanov A, Kastner J and Wenger R (2015), "MetaTracts - A method for robust extraction and visualization of carbon fiber bundles in fiber reinforced composites", In Pacific Visualization Symposium (PacificVis), 2015 IEEE. Hangzhou, China, China, April, 2015. , pp. 191-198.
BibTeX:
@inproceedings{2015_Bhattacharya,
  author = {A. Bhattacharya and C. Heinzl and A. Amirkhanov and J. Kastner and R. Wenger},
  title = {MetaTracts - A method for robust extraction and visualization of carbon fiber bundles in fiber reinforced composites},
  booktitle = {Pacific Visualization Symposium (PacificVis), 2015 IEEE},
  year = {2015},
  pages = {191-198}
}
Charwat-Pessler J, Musso M, Petutschnigg A, Entacher K, Plank B, Wernersson E, Tangl S and Schuller-Götzburg P (2015), "A Bone Sample Containing a Bone Graft Substitute Analyzed by Correlating Density Information Obtained by X-ray Micro Tomography with Compositional Information Obtained by Raman Microscopy", MATERIALS SCIENCE., June, 2015. Vol. 8(7), pp. 3831-3853.
BibTeX:
@article{2015_Charwat-Pessler,
  author = {J. Charwat-Pessler and M. Musso and A. Petutschnigg and K. Entacher and B. Plank and E. Wernersson and S. Tangl and P. Schuller-Götzburg},
  title = {A Bone Sample Containing a Bone Graft Substitute Analyzed by Correlating Density Information Obtained by X-ray Micro Tomography with Compositional Information Obtained by Raman Microscopy},
  journal = {MATERIALS SCIENCE},
  year = {2015},
  volume = {8},
  number = {7},
  pages = {3831-3853}
}
Fröhler B, Amirkhanov A, Kastner J, Gröller E and Heinzl C (2015), "Multimodal Visualization and Analysis of Spectral and Scalar Data", In Proceedings of the 9th conference for Austrian universities of applied sciences. Hagenberg, Austria, April, 2015. , pp. 7.
BibTeX:
@inproceedings{2015_Froehler,
  author = {B. Fröhler and A. Amirkhanov and J. Kastner and E. Gröller and C. Heinzl},
  title = {Multimodal Visualization and Analysis of Spectral and Scalar Data},
  booktitle = {Proceedings of the 9th conference for Austrian universities of applied sciences},
  year = {2015},
  pages = {7}
}
Gusenbauer C, Großeiber S, Harrer B, Plank B, Klösch G, Schützenhöfer W, Ilie S, Requena G and Kastner J (2015), "CT applications in steel research", In DACH Jahrestagung 2015. Salzburg, Austria, May, 2015. , pp. 8.
BibTeX:
@inproceedings{2015_Gusenbauer,
  author = {C. Gusenbauer and S. Großeiber and B. Harrer and B. Plank and G. Klösch and W. Schützenhöfer and S. Ilie and G. Requena and J. Kastner},
  title = {CT applications in steel research},
  booktitle = {DACH Jahrestagung 2015},
  year = {2015},
  pages = {8}
}
Hannesschläger C, Revol V, Plank B, Salaberger D and Kastner J (2015), "Fibre structure characterisation of injection moulded short fibre-reinforced polymers by X-ray scatter dark field tomography", Case Studies in Nondestructive Testing and Evaluation., April, 2015. Vol. 3(3), pp. 34-41.
BibTeX:
@article{2015_Hannesschlaeger,
  author = {C. Hannesschläger and V. Revol and B. Plank and D. Salaberger and J. Kastner},
  title = {Fibre structure characterisation of injection moulded short fibre-reinforced polymers by X-ray scatter dark field tomography},
  journal = {Case Studies in Nondestructive Testing and Evaluation},
  year = {2015},
  volume = {3},
  number = {3},
  pages = {34-41}
}
Heinzl C, Kastner J, Firsching M, Nachtrab F, Uhlmann N, Takman P, Holmberg A, Krumm M, Sauerwein C, Lichau D and Doux P (2015), "Laboratory X-ray tomography for non-destructive testing of specimens and materials at the nanoscale", In Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015). Ghent, Belgium, June, 2015.
BibTeX:
@inproceedings{2015_Heinzl,
  author = {C. Heinzl and J. Kastner and M. Firsching and F. Nachtrab and N. Uhlmann and P. Takman and A. Holmberg and M. Krumm and C. Sauerwein and D. Lichau and P. Doux},
  title = {Laboratory X-ray tomography for non-destructive testing of specimens and materials at the nanoscale},
  booktitle = {Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015)},
  year = {2015}
}
Heinzl C (2015), "Making X-Ray Nano-Tomography Accessible with a Stand-Alone Device", In AAAS Annual Meeting 2015. San Jose, CA, United States of America, February, 2015.
BibTeX:
@inproceedings{2015_Heinzla,
  author = {C. Heinzl},
  title = {Making X-Ray Nano-Tomography Accessible with a Stand-Alone Device},
  booktitle = {AAAS Annual Meeting 2015},
  year = {2015}
}
Heinzl C (2015), "The QUICOM project - Overview and current state", In Proceedings of 5th EASN Workshop on Aeronautic Structures. Manchester, Austria, September, 2015.
BibTeX:
@inproceedings{2015_Heinzlb,
  author = {C. Heinzl},
  title = {The QUICOM project - Overview and current state},
  booktitle = {Proceedings of 5th EASN Workshop on Aeronautic Structures},
  year = {2015}
}
Kain G, Charwat-Pessler J, Barbu M, Plank B, Richter K and Petutschnigg A (2015), "Analyzing wood bark insulation board structure using X-ray computed tomography and modeling its thermal conductivity by means of finite difference method", JOURNAL OF COMPOSITE MATERIALS., April, 2015. Vol. 99999(99999), pp. 12.
BibTeX:
@article{2015_Kain,
  author = {G. Kain and J. Charwat-Pessler and M. Barbu and B. Plank and K. Richter and A. Petutschnigg},
  title = {Analyzing wood bark insulation board structure using X-ray computed tomography and modeling its thermal conductivity by means of finite difference method},
  journal = {JOURNAL OF COMPOSITE MATERIALS},
  year = {2015},
  volume = {99999},
  number = {99999},
  pages = {12}
}
Kain G, Barbu M, Richter K, Plank B, Tondi G and Petutschnigg A (2015), "Use of tree bark as insulation material", FOREST PRODUCTS JOURNAL., July, 2015. Vol. 65(4), pp. 16-25.
BibTeX:
@article{2015_Kaina,
  author = {G. Kain and M. Barbu and K. Richter and B. Plank and G. Tondi and A. Petutschnigg},
  title = {Use of tree bark as insulation material},
  journal = {FOREST PRODUCTS JOURNAL},
  year = {2015},
  volume = {65},
  number = {4},
  pages = {16-25}
}
Kastner J, Plank B and Heinzl C (2015), "Advanced X-ray computed tomography methods: High resolution CT, phase contrast CT, quantitative CT and 4DCT", In Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015). Ghent, Belgium, June, 2015. , pp. 13.
BibTeX:
@inproceedings{2015_Kastner,
  author = {J. Kastner and B. Plank and C. Heinzl},
  title = {Advanced X-ray computed tomography methods: High resolution CT, phase contrast CT, quantitative CT and 4DCT},
  booktitle = {Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015)},
  year = {2015},
  pages = {13}
}
Kastner J, Plank B and Salaberger D (2015), "Application of CT for the characterization of light-weight materials and components", In 7 Landshuter Lightweight-Confernce. Landhut, Germany, February, 2015.
BibTeX:
@inproceedings{2015_Kastnera,
  author = {J. Kastner and B. Plank and D. Salaberger},
  title = {Application of CT for the characterization of light-weight materials and components},
  booktitle = {7 Landshuter Lightweight-Confernce},
  year = {2015}
}
Kastner J (2015), "CT for nondestructive testnig and materials characterication", In 5th CIA-CT Conference and InteraqCT event on ”Industrial Applications of Computed Tomography”. Lyngby, Denmark, Denmark, June, 2015.
BibTeX:
@inproceedings{2015_Kastnerb,
  author = {J. Kastner},
  title = {CT for nondestructive testnig and materials characterication},
  booktitle = {5th CIA-CT Conference and InteraqCT event on ”Industrial Applications of Computed Tomography”},
  year = {2015}
}
Kastner J, Plank B, Gusenbauer C, Senck S, Revol V and Sasov A (2015), "Talbot-Lau grating interferometer X-ray computed tomography for the characterization of fibre-reinforced polymers", In Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015). Ghent, Belgium, June, 2015. , pp. 10.
BibTeX:
@inproceedings{2015_Kastnerc,
  author = {J. Kastner and B. Plank and C. Gusenbauer and S. Senck and V. Revol and A. Sasov},
  title = {Talbot-Lau grating interferometer X-ray computed tomography for the characterization of fibre-reinforced polymers},
  booktitle = {Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015)},
  year = {2015},
  pages = {10}
}
Kastner J, Plank B, Hannesschläger C and Revol V (2015), "Talbot-Laut-Gratinginterferometer CT for characterization of fibre reinforced polymers", In DACH Jahrestagung 2015. Salzburg, Austria, May, 2015.
BibTeX:
@inproceedings{2015_Kastnerd,
  author = {J. Kastner and B. Plank and C. Hannesschläger and V. Revol},
  title = {Talbot-Laut-Gratinginterferometer CT for characterization of fibre reinforced polymers},
  booktitle = {DACH Jahrestagung 2015},
  year = {2015}
}
Kastner J, Senck S, Gusenbauer C, Plank B, Hannesschläger C, Zauner H, Heinzl C and Sasov A (2015), "Three-dimensional characterization of fibre-reinforced polymers using a Talbot-Lau grating interferometer μ-CT und data fusion methods", In XNPIG 2015 3rd Meeting of X-Ray and Neutron Phase Imaging with Gratings. Bethesda, United States of America, September, 2015.
BibTeX:
@inproceedings{2015_Kastnere,
  author = {J. Kastner and S. Senck and C. Gusenbauer and B. Plank and C. Hannesschläger and H. Zauner and C. Heinzl and A. Sasov},
  title = {Three-dimensional characterization of fibre-reinforced polymers using a Talbot-Lau grating interferometer μ-CT und data fusion methods},
  booktitle = {XNPIG 2015 3rd Meeting of X-Ray and Neutron Phase Imaging with Gratings},
  year = {2015}
}
Kastner J and Heinzl C (2015), "X-ray computed tomography for non-destructive testing and materials characterization", In Integrated Imaging and Vision Techniques for Industrial Inspection. , pp. null. Springer.
BibTeX:
@incollection{2015_Kastnerf,
  author = {J. Kastner and C. Heinzl},
  editor = {Z.Liu and H. Ukida and P. Ramuhalli and K. Niel},
  title = {X-ray computed tomography for non-destructive testing and materials characterization},
  booktitle = {Integrated Imaging and Vision Techniques for Industrial Inspection},
  publisher = {Springer},
  year = {2015},
  pages = {null},
  edition = {1}
}
Kleindel S, Salaberger D and Hochenauer C (2015), "Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts", INTERNATIONAL POLYMER PROCESSING., March, 2015. Vol. 30(1), pp. 100-112.
BibTeX:
@article{2015_Kleindel,
  author = {S. Kleindel and D. Salaberger and C. Hochenauer},
  title = {Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts},
  journal = {INTERNATIONAL POLYMER PROCESSING},
  year = {2015},
  volume = {30},
  number = {1},
  pages = {100-112}
}
Leiss-Holzinger E, Wiesauer K, Stephani H, Heise B, Stifter D, Kriechbaumer B, Spachinger S, Gusenbauer C and Withalm G (2015), "Imaging of the inner structure of cave bear teeth by novel non-destructive techniques", Palaeontologia Electronica., February, 2015. Vol. 18(1)
BibTeX:
@article{2015_Leiss-Holzinger,
  author = {E. Leiss-Holzinger and K. Wiesauer and H. Stephani and B. Heise and D. Stifter and B. Kriechbaumer and S. Spachinger and C. Gusenbauer and G. Withalm},
  title = {Imaging of the inner structure of cave bear teeth by novel non-destructive techniques},
  journal = {Palaeontologia Electronica},
  year = {2015},
  volume = {18},
  number = {1}
}
Mathmann K, Heinzl C and Kastner J (2015), "Multimodal image analysis for the characterization of complex wheat-dough microstructures", In International Congress on Engineering and Food 12. Quebec City, Canada, June, 2015. , pp. 1.
BibTeX:
@inproceedings{2015_Mathmann,
  author = {K. Mathmann and C. Heinzl and J. Kastner},
  title = {Multimodal image analysis for the characterization of complex wheat-dough microstructures},
  booktitle = {International Congress on Engineering and Food 12},
  year = {2015},
  pages = {1}
}
Mayr G, Hendorfer G, Sekelja J and Plank B (2015), "Quantitative Bestimmung der Porosität in kohlefaserverstärkte Polymerverbundwerkstoffe mittels Pulsthermographie", In Tagungsband des Thermographie-Kolloquium. Leinfelden-Echterdingen, Germany, Germany, October, 2015.
BibTeX:
@inproceedings{2015_Mayr,
  author = {G. Mayr and G. Hendorfer and J. Sekelja and B. Plank},
  title = {Quantitative Bestimmung der Porosität in kohlefaserverstärkte Polymerverbundwerkstoffe mittels Pulsthermographie},
  booktitle = {Tagungsband des Thermographie-Kolloquium},
  year = {2015}
}
Mayr G, Plank B, Gruber J, Sekelja J and Hendorfer G (2015), "Quantitative evaluation of the effective thermal diffusivity for model-based porosity prediction in CFRP", Quantitative InfraRed Thermography Journal., November, 2015. Vol. 13(1), pp. 70-82.
BibTeX:
@article{2015_Mayra,
  author = {G. Mayr and B. Plank and J. Gruber and J. Sekelja and G. Hendorfer},
  title = {Quantitative evaluation of the effective thermal diffusivity for model-based porosity prediction in CFRP},
  journal = {Quantitative InfraRed Thermography Journal},
  year = {2015},
  volume = {13},
  number = {1},
  pages = {70-82}
}
Nachtrab F, Hofmann T, Speier C, Firsching M, Uhlmann N, Takman P, Heinzl C, Holmberg A, Krumm M and Sauerwein C (2015), "Development of a Timepix based detector for the NanoXCT project", Journal of Instrumentation., November, 2015. Vol. 10(11)
BibTeX:
@article{2015_Nachtrab,
  author = {F. Nachtrab and T. Hofmann and C. Speier and M. Firsching and N. Uhlmann and P. Takman and C. Heinzl and A. Holmberg and M. Krumm and C. Sauerwein},
  title = {Development of a Timepix based detector for the NanoXCT project},
  journal = {Journal of Instrumentation},
  year = {2015},
  volume = {10},
  number = {11}
}
Palmstingl M, Koch T, Salaberger D and Paier T (2015), "Morphological impact on the fatigue behaviour of short fibre reinforced polypropylene", Materials Science Forum., April, 2015. Vol. 825(1), pp. 830-837.
BibTeX:
@article{2015_Palmstingl,
  author = {M. Palmstingl and T. Koch and D. Salaberger and T. Paier},
  title = {Morphological impact on the fatigue behaviour of short fibre reinforced polypropylene},
  journal = {Materials Science Forum},
  year = {2015},
  volume = {825},
  number = {1},
  pages = {830-837}
}
Plank B, Hannesschläger C, Revol V and Kastner J (2015), "Characterisation of anisotropic fibre orientation in composites by means of X-ray grating interferometry computed tomography", MATERIALS SCIENCE FORUM., May, 2015. Vol. 826(1), pp. 868-875.
BibTeX:
@article{2015_Plank,
  author = {B. Plank and C. Hannesschläger and V. Revol and J. Kastner},
  title = {Characterisation of anisotropic fibre orientation in composites by means of X-ray grating interferometry computed tomography},
  journal = {MATERIALS SCIENCE FORUM},
  year = {2015},
  volume = {826},
  number = {1},
  pages = {868-875}
}
Plank B, Rao G and Kastner J (2015), "Evaluation of CFRP-Reference Samples for Porosity made by Drilling and Comparison with Industrial Porosity Samples by Means of Quantitative X-ray Computed Tomography", In Proceedings 7th International Symposium for NDT in Aerospace. Bremen, Germany, November, 2015. , pp. 10.
BibTeX:
@inproceedings{2015_Planka,
  author = {B. Plank and G. Rao and J. Kastner},
  title = {Evaluation of CFRP-Reference Samples for Porosity made by Drilling and Comparison with Industrial Porosity Samples by Means of Quantitative X-ray Computed Tomography},
  booktitle = {Proceedings 7th International Symposium for NDT in Aerospace},
  year = {2015},
  pages = {10}
}
Porta S, Zwettler G, Kurschl W, Dinu C, Juttla G, Pichlkastner K, Gell H, Kaiser B and Kisters K (2015), "Quantifizierung leichter mentaler Erregung durch korrelative Veränderungen von HK- und metabolischen Parametern anhand einer 3-D Gefahrensimulation", NIEREN-UND HOCHDRUCKKRANKHEITEN., October, 2015. Vol. 44(10), pp. 9.
BibTeX:
@article{2015_Porta,
  author = {S. Porta and G. Zwettler and W. Kurschl and C. Dinu and G. Juttla and K. Pichlkastner and H. Gell and B. Kaiser and K. Kisters},
  title = {Quantifizierung leichter mentaler Erregung durch korrelative Veränderungen von HK- und metabolischen Parametern anhand einer 3-D Gefahrensimulation},
  journal = {NIEREN-UND HOCHDRUCKKRANKHEITEN},
  year = {2015},
  volume = {44},
  number = {10},
  pages = {9}
}
Reh A, Amirkhanov A, Heinzl C, Kastner J and Gröller E (2015), "Fuzzy feature tracking: Visual analysis of industrial 4D-XCT data", COMPUTERS & GRAPHICS., May, 2015. Vol. 3(1), pp. 177-184.
BibTeX:
@article{2015_Reh,
  author = {A. Reh and A. Amirkhanov and C. Heinzl and J. Kastner and E. Gröller},
  title = {Fuzzy feature tracking: Visual analysis of industrial 4D-XCT data},
  journal = {COMPUTERS & GRAPHICS},
  year = {2015},
  volume = {3},
  number = {1},
  pages = {177-184}
}
Salaberger D, Hine P, Jerabek M and Kastner J (2015), "Assessment of accuracy of fibre orientation measurement using X-ray computed tomography", In Proceedings of the 20th International Conference on Composite Materials. Copenhagen, Denmark, July, 2015. , pp. 8.
BibTeX:
@inproceedings{2015_Salaberger,
  author = {D. Salaberger and P. Hine and M. Jerabek and J. Kastner},
  title = {Assessment of accuracy of fibre orientation measurement using X-ray computed tomography},
  booktitle = {Proceedings of the 20th International Conference on Composite Materials},
  year = {2015},
  pages = {8}
}
Salaberger D, Jerabek M, Koch T and Kastner J (2015), "Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers", Materials Science Forum., March, 2015. Vol. 825(1), pp. 907-913.
BibTeX:
@article{2015_Salabergera,
  author = {D. Salaberger and M. Jerabek and T. Koch and J. Kastner},
  title = {Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers},
  journal = {Materials Science Forum},
  year = {2015},
  volume = {825},
  number = {1},
  pages = {907-913}
}
Senck S and Coquerelle M (2015), "Morphological Integration and Variation in Facial Orientation in Pongo pygmaeus pygmaeus: A Geometric Morphometric Approach via Partial Least Squares", International Journal of Primatology., May, 2015. Vol. 36(3), pp. 489-512.
BibTeX:
@article{2015_Senck,
  author = {S. Senck and M. Coquerelle},
  title = {Morphological Integration and Variation in Facial Orientation in Pongo pygmaeus pygmaeus: A Geometric Morphometric Approach via Partial Least Squares},
  journal = {International Journal of Primatology},
  year = {2015},
  volume = {36},
  number = {3},
  pages = {489-512}
}
Senck S, Kastner J, Plank B, Salaberger D and Gusenbauer C (2015), "Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT", In Bruker microCT User Meeting. Bruges, Belgium, May, 2015.
BibTeX:
@inproceedings{2015_Sencka,
  author = {S. Senck and J. Kastner and B. Plank and D. Salaberger and C. Gusenbauer},
  title = {Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT},
  booktitle = {Bruker microCT User Meeting},
  year = {2015}
}
Senck S, Bookstein F, Benazzi S, Kastner J and Weber G (2015), "Virtual Reconstruction of Modern and Fossil Hominoid Crania: Consequences of Reference Sample Choice", The Anatomical Record., January, 2015. Vol. 298(5), pp. 827-841.
BibTeX:
@article{2015_Senckb,
  author = {S. Senck and F. Bookstein and S. Benazzi and J. Kastner and G. Weber},
  title = {Virtual Reconstruction of Modern and Fossil Hominoid Crania: Consequences of Reference Sample Choice},
  journal = {The Anatomical Record},
  year = {2015},
  volume = {298},
  number = {5},
  pages = {827-841}
}
Senck S, Plank B, Kastner J, Ramadani F, Trieb K and Hofstaetter S (2015), "Visualization of local cortical defects in Charcot foot using microcomputed tomography", The orthopaedist., January, 2015. Vol. 44(1), pp. 8-13.
BibTeX:
@article{2015_Senckc,
  author = {S. Senck and B. Plank and J. Kastner and F. Ramadani and K. Trieb and S. Hofstaetter},
  title = {Visualization of local cortical defects in Charcot foot using microcomputed tomography},
  journal = {The orthopaedist},
  year = {2015},
  volume = {44},
  number = {1},
  pages = {8-13}
}
Zauner H, Kastner J, Salaberger D and Heinzl C (2015), "3D image processing for single fibre characterization by means of XCT", Acta Stereologica., May, 2015. Vol. 1(1)
BibTeX:
@article{2015_Zauner,
  author = {H. Zauner and J. Kastner and D. Salaberger and C. Heinzl},
  title = {3D image processing for single fibre characterization by means of XCT},
  journal = {Acta Stereologica},
  year = {2015},
  volume = {1},
  number = {1}
}
Zauner H, Kastner J and Heinzl C (2015), "Multimodal Registration and Fusion of Industrial CT Data", In Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015). Ghent, Belgium, June, 2015.
BibTeX:
@inproceedings{2015_Zaunera,
  author = {H. Zauner and J. Kastner and C. Heinzl},
  title = {Multimodal Registration and Fusion of Industrial CT Data},
  booktitle = {Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015)},
  year = {2015}
}
Aigner M and Salaberger D (2014), "Determining the orientation, distribution and concentration of glass fibers in polymer matrix studied by means of X-ray computed tomography and optical coherence tomography", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 395-402.
BibTeX:
@inproceedings{2014_Aigner,
  author = {M. Aigner and D. Salaberger},
  title = {Determining the orientation, distribution and concentration of glass fibers in polymer matrix studied by means of X-ray computed tomography and optical coherence tomography},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {395-402}
}
Amirkhanov A, Fröhler B, Kastner J, Gröller E and Heinzl C (2014), "InSpectr: Multi-Modal Exploration, Visualization, and Analysis of Spectral Data", COMPUTER GRAPHICS FORUM., June, 2014. Vol. 33(3), pp. 91-100.
BibTeX:
@article{2014_Amirkhanov,
  author = {A. Amirkhanov and B. Fröhler and J. Kastner and E. Gröller and C. Heinzl},
  title = {InSpectr: Multi-Modal Exploration, Visualization, and Analysis of Spectral Data},
  journal = {COMPUTER GRAPHICS FORUM},
  year = {2014},
  volume = {33},
  number = {3},
  pages = {91-100}
}
Amirkhanov A, Bruckner S, Heinzl C and Gröller E (2014), "The Haunted Swamps of Heuristics: Uncertainty in Problem Solving", In Scientific Visualization. (5), pp. 51-60. Springer.
BibTeX:
@incollection{2014_Amirkhanova,
  author = {A. Amirkhanov and S. Bruckner and C. Heinzl and E. Gröller},
  title = {The Haunted Swamps of Heuristics: Uncertainty in Problem Solving},
  booktitle = {Scientific Visualization},
  publisher = {Springer},
  year = {2014},
  number = {5},
  pages = {51-60}
}
Amirkhanov A, Reiter M, Kastner J, Gröller E and Heinzl C (2014), "Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 189-196.
BibTeX:
@inproceedings{2014_Amirkhanovb,
  author = {A. Amirkhanov and M. Reiter and J. Kastner and E. Gröller and C. Heinzl},
  title = {Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {189-196}
}
Andreas H, Reitberger M, Lesslhumer J, Plank B and Müller U (2014), "Wood polymer composites versus thermally treated wood versus wood: cyclic testing", European Journal of Wood and Wood Products., September, 2014. Vol. 72(6), pp. 815-823.
BibTeX:
@article{2014_Andreas,
  author = {H. Andreas and M. Reitberger and J. Lesslhumer and B. Plank and U. Müller},
  title = {Wood polymer composites versus thermally treated wood versus wood: cyclic testing},
  journal = {European Journal of Wood and Wood Products},
  year = {2014},
  volume = {72},
  number = {6},
  pages = {815-823}
}
Charwat-Pessler J, Plank B, Kain G, Stefanie W, Gruenewald T, Standfest G and Petutschnigg A (2014), "Application of X – ray micro computed tomography on wood and wood based composites", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 329-336.
BibTeX:
@inproceedings{2014_Charwat-Pessler,
  author = {J. Charwat-Pessler and B. Plank and G. Kain and W. Stefanie and T. Gruenewald and G. Standfest and A. Petutschnigg},
  title = {Application of X – ray micro computed tomography on wood and wood based composites},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {329-336}
}
Chimani C, Kretz R, Angermeier C and Gusenbauer C (2014), "Investigations on Microstructure Effect of Changing Fluid Flow Characteristic in High Pressure Die Casting", MATERIALS SCIENCE FORUM., April, 2014. Vol. 782(782), pp. 8-15.
BibTeX:
@article{2014_Chimani,
  author = {C. Chimani and R. Kretz and C. Angermeier and C. Gusenbauer},
  title = {Investigations on Microstructure Effect of Changing Fluid Flow Characteristic in High Pressure Die Casting},
  journal = {MATERIALS SCIENCE FORUM},
  year = {2014},
  volume = {782},
  number = {782},
  pages = {8-15}
}
Großeiber S, Gusenbauer C, Ilie S, Requena G and Kozeschnik E (2014), "Relevance of hot ductility tests to crack sensitivity during continuous", Advanced Materials Research., May, 2014. Vol. 922(922), pp. 201-206.
BibTeX:
@article{2014_Grosseiber,
  author = {S. Großeiber and C. Gusenbauer and S. Ilie and G. Requena and E. Kozeschnik},
  title = {Relevance of hot ductility tests to crack sensitivity during continuous},
  journal = {Advanced Materials Research},
  year = {2014},
  volume = {922},
  number = {922},
  pages = {201-206}
}
Gusenbauer C, Reiter M, Kastner J and Klösch G (2014), "Detection of non-metallic inclusions in steel by X-ray computed tomography and after fatigue testing", In Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic.
BibTeX:
@inproceedings{2014_Gusenbauer,
  author = {C. Gusenbauer and M. Reiter and J. Kastner and G. Klösch},
  title = {Detection of non-metallic inclusions in steel by X-ray computed tomography and after fatigue testing},
  booktitle = {Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic},
  year = {2014}
}
Heinzl C, Bruckner S and Gröller E (2014), "Guest editorial—Uncertainty and parameter space analysis in visualization", COMPUTERS & GRAPHICS., July, 2014. Vol. 41(1), pp. 1-2.
BibTeX:
@article{2014_Heinzl,
  author = {C. Heinzl and S. Bruckner and E. Gröller},
  title = {Guest editorial—Uncertainty and parameter space analysis in visualization},
  journal = {COMPUTERS & GRAPHICS},
  year = {2014},
  volume = {41},
  number = {1},
  pages = {1-2}
}
Heinzl C (2014), "Quantitative inspection of complex composite aeronautic parts using advanced X-ray techniques", In Aeronautics and air transport research 7th Framework Programme 2007-2013 VOL 3 Project synopses, calls 2012 & 2013. , pp. 148-150.
BibTeX:
@incollection{2014_Heinzla,
  author = {C. Heinzl},
  editor = {European Commission and Directorate-General for Research},
  title = {Quantitative inspection of complex composite aeronautic parts using advanced X-ray techniques},
  booktitle = {Aeronautics and air transport research 7th Framework Programme 2007-2013 VOL 3 Project synopses, calls 2012 & 2013},
  year = {2014},
  pages = {148-150},
  edition = {3}
}
Heinzl C, Weissenböck J, Reh A, Kastner J, Dierig T, Günther T, Kiefel D and Stössel R (2014), "Software tools for robust extraction, analysis and visualization of porosities in XCT scans of fiber-reinforced polymers", In Proceedings 6th International symposium for NDT in Aerospace. Madrid, Spain, November, 2014.
BibTeX:
@inproceedings{2014_Heinzlb,
  author = {C. Heinzl and J. Weissenböck and A. Reh and J. Kastner and T. Dierig and T. Günther and D. Kiefel and R. Stössel},
  title = {Software tools for robust extraction, analysis and visualization of porosities in XCT scans of fiber-reinforced polymers},
  booktitle = {Proceedings 6th International symposium for NDT in Aerospace},
  year = {2014}
}
Jerabek M, Salaberger D, Reiter M and Major Z (2014), "Prediction of fiber orientation in short glass fiber polypropylene composites and the consequences for micromechanical simulations", In Proceedings of ECCM 17 European Conference on Composite Materials. Sevilla, Spain, June, 2014. , pp. 1.
BibTeX:
@inproceedings{2014_Jerabek,
  author = {M. Jerabek and D. Salaberger and M. Reiter and Z. Major},
  title = {Prediction of fiber orientation in short glass fiber polypropylene composites and the consequences for micromechanical simulations},
  booktitle = {Proceedings of ECCM 17 European Conference on Composite Materials},
  year = {2014},
  pages = {1}
}
Kastner J, Zaunschirm S, Requena G, Baumgartner S and Pinto H (2014), "3D-microstructure characterization of thermomecanically treated Mg-alloys by high resolution X-ray computed tomography", In Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014). Prague, Czech Republic, October, 2014.
BibTeX:
@inproceedings{2014_Kastner,
  author = {J. Kastner and S. Zaunschirm and G. Requena and S. Baumgartner and H. Pinto},
  title = {3D-microstructure characterization of thermomecanically treated Mg-alloys by high resolution X-ray computed tomography},
  booktitle = {Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014)},
  year = {2014}
}
Kastner J (2014), "Applications of CT in the research of Mg", In German Society for Non-Destructive Testing. Potsdam, Germany, May, 2014.
BibTeX:
@inproceedings{2014_Kastnera,
  author = {J. Kastner},
  title = {Applications of CT in the research of Mg},
  booktitle = {German Society for Non-Destructive Testing},
  year = {2014}
}
Kastner J (2014), "Characteristics of Research at University of Applied Sciences", In 20 years University of Applied Sciences in Austria. , pp. null. Facultas.
BibTeX:
@incollection{2014_Kastnerb,
  author = {J. Kastner},
  title = {Characteristics of Research at University of Applied Sciences},
  booktitle = {20 years University of Applied Sciences in Austria},
  publisher = {Facultas},
  year = {2014},
  pages = {null}
}
Kastner J (2014), "Proceedings ICT2014", In Proceedings ICT2014. Wels, Austria, February, 2014.
BibTeX:
@inproceedings{2014_Kastnerc,
  author = {J. Kastner},
  title = {Proceedings ICT2014},
  booktitle = {Proceedings ICT2014},
  year = {2014}
}
Kastner J (2014), "Talbot Lau CT for the characterization of fibre reinforced polymers", In German Society for Non-Destructive Testing. Potsdam, Germany, May, 2014.
BibTeX:
@inproceedings{2014_Kastnerd,
  author = {J. Kastner},
  title = {Talbot Lau CT for the characterization of fibre reinforced polymers},
  booktitle = {German Society for Non-Destructive Testing},
  year = {2014}
}
Kastner J (2014), "X-ray computed tomography for characterization of composites", In Proceedings of ECCM 17 European Conference on Composite Materials. Sevilla, Spain, June, 2014.
BibTeX:
@inproceedings{2014_Kastnere,
  author = {J. Kastner},
  title = {X-ray computed tomography for characterization of composites},
  booktitle = {Proceedings of ECCM 17 European Conference on Composite Materials},
  year = {2014}
}
Kiefel D, Stössel R, Plank B, Heinzl C and Kastner J (2014), "CFRP porosity characterization using µ-Computed Tomography with optimized test parameters supported by XCT-simulation", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 35-43.
BibTeX:
@inproceedings{2014_Kiefel,
  author = {D. Kiefel and R. Stössel and B. Plank and C. Heinzl and J. Kastner},
  title = {CFRP porosity characterization using µ-Computed Tomography with optimized test parameters supported by XCT-simulation},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {35-43}
}
Mayr G, Plank B, Gruber J, Sekelja J and Hendorfer G (2014), "Thermal diffusivity measurements of porous CFRP specimens with different number of plies using pulsed thermography in transmission and reflection mode", In Proceedings of 12th Quantitative InfraRed Thermography Conference. Bordeaux, France, July, 2014. , pp. 10.
BibTeX:
@inproceedings{2014_Mayr,
  author = {G. Mayr and B. Plank and J. Gruber and J. Sekelja and G. Hendorfer},
  title = {Thermal diffusivity measurements of porous CFRP specimens with different number of plies using pulsed thermography in transmission and reflection mode},
  booktitle = {Proceedings of 12th Quantitative InfraRed Thermography Conference},
  year = {2014},
  pages = {10}
}
Nachtrab F, Firsching M, Uhlmann N, Speier C, Takman P, Tuohimaa T, Heinzl C, Kastner J, Larsson D, Holmberg A, Berti G, Sauerwein C and Krumm M (2014), "NanoXCT: development of a laboratory nano-CT system", In PROCEEDINGS OF SPIE VOLUME 9212. San Diego, California, United States, United States of America, August, 2014.
BibTeX:
@inproceedings{2014_Nachtrab,
  author = {F. Nachtrab and M. Firsching and N. Uhlmann and C. Speier and P. Takman and T. Tuohimaa and C. Heinzl and J. Kastner and D. Larsson and A. Holmberg and G. Berti and C. Sauerwein and M. Krumm},
  title = {NanoXCT: development of a laboratory nano-CT system},
  booktitle = {PROCEEDINGS OF SPIE VOLUME 9212},
  year = {2014}
}
Oberpeilsteiner S, Reiter T and Salaberger D (2014), "Coupling of in-situ-CT with Virtual Testing by FEM of Short Fiber Reinforced Materials", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 7.
BibTeX:
@inproceedings{2014_Oberpeilsteiner,
  author = {S. Oberpeilsteiner and T. Reiter and D. Salaberger},
  title = {Coupling of in-situ-CT with Virtual Testing by FEM of Short Fiber Reinforced Materials},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {7}
}
Oberpeilsteiner S, Reiter T and Salaberger D (2014), "Modelling of short fiber reinforced materials for evaluation of effective material data", In Proceedings FFH 2014. Kufstein, Austria, April, 2014. , pp. 5.
BibTeX:
@inproceedings{2014_Oberpeilsteinera,
  author = {S. Oberpeilsteiner and T. Reiter and D. Salaberger},
  title = {Modelling of short fiber reinforced materials for evaluation of effective material data},
  booktitle = {Proceedings FFH 2014},
  year = {2014},
  pages = {5}
}
Plank B, Fürst C, Senck S and Kastner J (2014), "Analysis by means of X-ray computed tomography: From wood-plastic composite via carbon templates to C / Si / SiC ceramics", In German Society for Non-Destructive Testing. Potsdam, Germany, May, 2014. , pp. 8.
BibTeX:
@inproceedings{2014_Plank,
  author = {B. Plank and C. Fürst and S. Senck and J. Kastner},
  title = {Analysis by means of X-ray computed tomography: From wood-plastic composite via carbon templates to C / Si / SiC ceramics},
  booktitle = {German Society for Non-Destructive Testing},
  year = {2014},
  pages = {8}
}
Plank B, Mayr G, Reh A, Kiefel D, Stössel R and Kastner J (2014), "Evaluation and Visualisation of Shape Factors in Dependence of the Void Content within CFRP by Means of X-ray Computed Tomography", In Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014). Prague, Czech Republic, October, 2014. , pp. 9.
BibTeX:
@inproceedings{2014_Planka,
  author = {B. Plank and G. Mayr and A. Reh and D. Kiefel and R. Stössel and J. Kastner},
  title = {Evaluation and Visualisation of Shape Factors in Dependence of the Void Content within CFRP by Means of X-ray Computed Tomography},
  booktitle = {Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014)},
  year = {2014},
  pages = {9}
}
Plank B, Senck S, Fürst C, Scharleitner H and Kastner J (2014), "Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed tomography", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 55-62.
BibTeX:
@inproceedings{2014_Plankb,
  author = {B. Plank and S. Senck and C. Fürst and H. Scharleitner and J. Kastner},
  title = {Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed tomography},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {55-62}
}
Reiter M, Kuhn C, Weiss D, Erler M, Kasperl S and Schröpfer S (2014), "CT-Wizard - Automatic determination of optimal CT measuring parameters for an unknown part", In Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic.
BibTeX:
@inproceedings{2014_Reiter,
  author = {M. Reiter and C. Kuhn and D. Weiss and M. Erler and S. Kasperl and S. Schröpfer},
  title = {CT-Wizard - Automatic determination of optimal CT measuring parameters for an unknown part},
  booktitle = {Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic},
  year = {2014}
}
Reiter M, Weiss D, Gusenbauer C, Kastner J, Erler M and Kasperl S (2014), "Evaluation of a histogram based image quality measure for X-ray computed tomography", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014.
BibTeX:
@inproceedings{2014_Reitera,
  author = {M. Reiter and D. Weiss and C. Gusenbauer and J. Kastner and M. Erler and S. Kasperl},
  title = {Evaluation of a histogram based image quality measure for X-ray computed tomography},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014}
}
Revol V, Plank B, Kottler C, Kastner J, Kaufmann R, Dommann A and Neels A (2014), "Laminate fibre structure characterisation by orientation-selective X-ray grating interferometry", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 45-51.
BibTeX:
@inproceedings{2014_Revol,
  author = {V. Revol and B. Plank and C. Kottler and J. Kastner and R. Kaufmann and A. Dommann and A. Neels},
  title = {Laminate fibre structure characterisation by orientation-selective X-ray grating interferometry},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {45-51}
}
Salaberger D, Arikan M, Paier T and Kastner J (2014), "Characterization of damage mechanisms in glass fiber reinforced polymers using X-ray computed tomography", In Proceedings of ECCM 17 European Conference on Composite Materials. Sevilla, Spain, June, 2014. , pp. 8.
BibTeX:
@inproceedings{2014_Salaberger,
  author = {D. Salaberger and M. Arikan and T. Paier and J. Kastner},
  title = {Characterization of damage mechanisms in glass fiber reinforced polymers using X-ray computed tomography},
  booktitle = {Proceedings of ECCM 17 European Conference on Composite Materials},
  year = {2014},
  pages = {8}
}
Salaberger D, Kastner J, Arikan M and Paier T (2014), "Characterization of damage mechanisms in glass fibre reinforced polymers using X-ray computed tomography", In Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014). Prague, Czech Republic, October, 2014. , pp. null.
BibTeX:
@inproceedings{2014_Salabergera,
  author = {D. Salaberger and J. Kastner and M. Arikan and T. Paier},
  title = {Characterization of damage mechanisms in glass fibre reinforced polymers using X-ray computed tomography},
  booktitle = {Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014)},
  year = {2014},
  pages = {null}
}
Schützenhöfer W, Tazreiter A, Plank B and Schumacher P (2014), "Determination of cleanliness different special steels comparison of different methods", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 159-165.
BibTeX:
@inproceedings{2014_Schuetzenhoefer,
  author = {W. Schützenhöfer and A. Tazreiter and B. Plank and P. Schumacher},
  title = {Determination of cleanliness different special steels comparison of different methods},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {159-165}
}
Sedlmair M, Heinzl C, Bruckner S, Piringer H and Möller T (2014), "Visual Parameter Space Analysis: A Conceptual Framework", IEEE Transactions on Visualization and Computer Graphics (TVCG)., December, 2014. Vol. 20(12), pp. 2161-2170.
BibTeX:
@article{2014_Sedlmair,
  author = {M. Sedlmair and C. Heinzl and S. Bruckner and H. Piringer and T. Möller},
  title = {Visual Parameter Space Analysis: A Conceptual Framework},
  journal = {IEEE Transactions on Visualization and Computer Graphics (TVCG)},
  year = {2014},
  volume = {20},
  number = {12},
  pages = {2161-2170}
}
Senck S, Gusenbauer C, Frelat M, McGlynn G, Weber G and Kastner J (2014), "Covariation between shape and bone microstructure in the proximal tibia in humans", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014. , pp. 321-328.
BibTeX:
@inproceedings{2014_Senck,
  author = {S. Senck and C. Gusenbauer and M. Frelat and G. McGlynn and G. Weber and J. Kastner},
  title = {Covariation between shape and bone microstructure in the proximal tibia in humans},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014},
  pages = {321-328}
}
Senck S, Coquerelle M, Weber G, Hofstaetter S and Kastner J (2014), "Estimation of microstructural parameters in the proximal tibia by means of shape regression: combining high resolution X-ray computed tomography and Geometric Morphometrics", In WCO-IOF-ESCEO-SEVILLE 2014. Sevilla, Spain, April, 2014. , pp. 256-256.
BibTeX:
@inproceedings{2014_Sencka,
  author = {S. Senck and M. Coquerelle and G. Weber and S. Hofstaetter and J. Kastner},
  title = {Estimation of microstructural parameters in the proximal tibia by means of shape regression: combining high resolution X-ray computed tomography and Geometric Morphometrics},
  booktitle = {WCO-IOF-ESCEO-SEVILLE 2014},
  year = {2014},
  pages = {256-256}
}
Senck S, Salaberger D, Kastner M, Fuchsbauer A and Kastner J (2014), "Microbial Electrolysis Cells: three-dimensional characterization of bacterial biofilm by means of high-resolution X-ray computed tomography and contrast agents", In German Society for Non-Destructive Testing. Potsdam, Germany, May, 2014. , pp. 1-8.
BibTeX:
@inproceedings{2014_Senckb,
  author = {S. Senck and D. Salaberger and M. Kastner and A. Fuchsbauer and J. Kastner},
  title = {Microbial Electrolysis Cells: three-dimensional characterization of bacterial biofilm by means of high-resolution X-ray computed tomography and contrast agents},
  booktitle = {German Society for Non-Destructive Testing},
  year = {2014},
  pages = {1-8}
}
Weissenböck J, Reh A, Salaberger D, Heinzl C and Kastner J (2014), "Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers", In Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014). Prague, Czech Republic, October, 2014.
BibTeX:
@inproceedings{2014_Weissenboeck,
  author = {J. Weissenböck and A. Reh and D. Salaberger and C. Heinzl and J. Kastner},
  title = {Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers},
  booktitle = {Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014)},
  year = {2014}
}
Weissenböck J, Stössel R, Kiefel D, Heinzl C and Kastner J (2014), "CFRP porosity characterization using µ-Computed Tomography with optimized test parameters", In Proceedings of Conference on Industrial Computed Tomography (iCT2014). Wels, Austria, February, 2014.
BibTeX:
@inproceedings{2014_Weissenboecka,
  author = {J. Weissenböck and R. Stössel and D. Kiefel and C. Heinzl and J. Kastner},
  title = {CFRP porosity characterization using µ-Computed Tomography with optimized test parameters},
  booktitle = {Proceedings of Conference on Industrial Computed Tomography (iCT2014)},
  year = {2014}
}
Weissenböck J, Amirkhanov A, Li W, Reh A, Amirkhanov A, Gröller E, Kastner J and Heinzl C (2014), "FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers", In Pacific Visualization Symposium (PacificVis), 2014 IEEE. Yokohama, Japan, March, 2014. , pp. 153-160.
BibTeX:
@inproceedings{2014_Weissenboeckb,
  author = {J. Weissenböck and A. Amirkhanov and W. Li and A. Reh and A. Amirkhanov and E. Gröller and J. Kastner and C. Heinzl},
  title = {FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers},
  booktitle = {Pacific Visualization Symposium (PacificVis), 2014 IEEE},
  year = {2014},
  pages = {153-160}
}
Weissenböck J, Arikan M, Salaberger D, Heinzl C and Kastner J (2014), "Quantitative Measurement and Visualization of Fiber Orientation and Length Distribution of Glass-, Carbon- and Cellulose Fiber Reinforced Polymers using X-Ray Computed Tomography", In German Society for Non-Destructive Testing. Potsdam, Germany, May, 2014.
BibTeX:
@inproceedings{2014_Weissenboeckc,
  author = {J. Weissenböck and M. Arikan and D. Salaberger and C. Heinzl and J. Kastner},
  title = {Quantitative Measurement and Visualization of Fiber Orientation and Length Distribution of Glass-, Carbon- and Cellulose Fiber Reinforced Polymers using X-Ray Computed Tomography},
  booktitle = {German Society for Non-Destructive Testing},
  year = {2014}
}
Weissenböck J, Arikan M, Salaberger D, Heinzl C and Kastner J (2014), "Quantitative Messung und Visualisierung von Faserorientierungs- und Faserlängenverteilung von Glas-, Kohle- und Zellulosefaserverstärkten Kunststoffen mittels µ-Röntgen-Computertomografie", In DGZFP Jahrestagung 2014.
BibTeX:
@inproceedings{2014_Weissenboeckd,
  author = {J. Weissenböck and M. Arikan and D. Salaberger and C. Heinzl and J. Kastner},
  title = {Quantitative Messung und Visualisierung von Faserorientierungs- und Faserlängenverteilung von Glas-, Kohle- und Zellulosefaserverstärkten Kunststoffen mittels µ-Röntgen-Computertomografie},
  booktitle = {DGZFP Jahrestagung 2014},
  year = {2014}
}
Aigner M and Salaberger D (2013), "The influence of glass fibres on the longational viscosity studied by means of optical coherence tomography and X-ray computed tomography", In PPS 29 Proceedings. Nürnberg (Deutschland) / Nuremberg (Germany), Germany, July, 2013.
BibTeX:
@inproceedings{2013_Aigner,
  author = {M. Aigner and D. Salaberger},
  title = {The influence of glass fibres on the longational viscosity studied by means of optical coherence tomography and X-ray computed tomography},
  booktitle = {PPS 29 Proceedings},
  year = {2013}
}
Amirkhanov A, Heinzl C, Kastner J and Gröller E (2013), "Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data", In SCCG Proceedings (Digital Library). Smolenice castle, Slovakia, Slovakia, May, 2013. , pp. 8.
BibTeX:
@inproceedings{2013_Amirkhanov,
  author = {A. Amirkhanov and C. Heinzl and J. Kastner and E. Gröller},
  title = {Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data},
  booktitle = {SCCG Proceedings (Digital Library)},
  year = {2013},
  pages = {8}
}
Charwat-Pessler J, Musso M, Entacher K, Plank B, Schuller-Götzburg P, Tangl S and Petutschnigg A (2013), "Improving CT Image Analysis of Augmented Bone with Raman Spectroscopy", Journal of Applied Mathematics., June, 2013. Vol. 2013, pp. 10.
BibTeX:
@article{2013_Charwat-Pessler,
  author = {J. Charwat-Pessler and M. Musso and K. Entacher and B. Plank and P. Schuller-Götzburg and S. Tangl and A. Petutschnigg},
  title = {Improving CT Image Analysis of Augmented Bone with Raman Spectroscopy},
  journal = {Journal of Applied Mathematics},
  year = {2013},
  volume = {2013},
  pages = {10}
}
Hahn C, Winterstein E, Straumit I, Plank B, Hinterhölzl R, Lomov S and Binetruy C (2013), "A SIMULATION APPROACH OF PERMEABILITY DETERMINATION USING COMPUTED TOMOGRAPHY SCANS", In COMPOSITES WEEK @ LEUVEN AND TEXCOMP-11 CONFERENCE. Leuven, Belgium, September, 2013. , pp. 8.
BibTeX:
@inproceedings{2013_Hahn,
  author = {C. Hahn and E. Winterstein and I. Straumit and B. Plank and R. Hinterhölzl and S. Lomov and C. Binetruy},
  title = {A SIMULATION APPROACH OF PERMEABILITY DETERMINATION USING COMPUTED TOMOGRAPHY SCANS},
  booktitle = {COMPOSITES WEEK @ LEUVEN AND TEXCOMP-11 CONFERENCE},
  year = {2013},
  pages = {8}
}
Heinzl C and Kastner J (2013), "Quantitative Inspection of Complex Composite Aeronautic Parts Using Advanced X‐ray Technique", In Proceedings 3rd EASN Workshop on Aerostructures. Milan, Italy, October, 2013. , pp. 5.
BibTeX:
@inproceedings{2013_Heinzl,
  author = {C. Heinzl and J. Kastner},
  title = {Quantitative Inspection of Complex Composite Aeronautic Parts Using Advanced X‐ray Technique},
  booktitle = {Proceedings 3rd EASN Workshop on Aerostructures},
  year = {2013},
  pages = {5}
}
Kastner J, Salaberger D and Plank B (2013), "High Resolution computed tomography for material testing and characterization", In 35 Years Austrian Society for non-destructive testing. Wien, Austria, September, 2013.
BibTeX:
@inproceedings{2013_Kastner,
  author = {J. Kastner and D. Salaberger and B. Plank},
  title = {High Resolution computed tomography for material testing and characterization},
  booktitle = {35 Years Austrian Society for non-destructive testing},
  year = {2013}
}
Kastner J, Plank B and Salaberger D (2013), "High resolution X-ray computed tomography for quantitative characterization of fiber reinforced polymers and heterogeneous light metals", In Proceeding ASNT 22nd Annual Research Symposium. Memphis, United States of America, March, 2013.
BibTeX:
@inproceedings{2013_Kastnera,
  author = {J. Kastner and B. Plank and D. Salaberger},
  title = {High resolution X-ray computed tomography for quantitative characterization of fiber reinforced polymers and heterogeneous light metals},
  booktitle = {Proceeding ASNT 22nd Annual Research Symposium},
  year = {2013}
}
Köpplmayr T, Milosavljevic I, Aigner M, Hasslacher R, Plank B, Salaberger D and Miethlinger J (2013), "Influence of fiber orientation and length distribution on the rheological characterization of glass-fiber-filled polypropylene", POLYMER TESTING., March, 2013. Vol. 31(3), pp. 535-544.
BibTeX:
@article{2013_Koepplmayr,
  author = {T. Köpplmayr and I. Milosavljevic and M. Aigner and R. Hasslacher and B. Plank and D. Salaberger and J. Miethlinger},
  title = {Influence of fiber orientation and length distribution on the rheological characterization of glass-fiber-filled polypropylene},
  journal = {POLYMER TESTING},
  year = {2013},
  volume = {31},
  number = {3},
  pages = {535-544}
}
Plank B, Gusenbauer C, Salaberger D and Kastner J (2013), "Computed tomography links together: A wide range of applications enables interdisciplinary collaborations with research, industry and business", In Proceedings FFH 2013. Dornbirn, Austria, April, 2013. , pp. 480-483.
BibTeX:
@inproceedings{2013_Plank,
  author = {B. Plank and C. Gusenbauer and D. Salaberger and J. Kastner},
  title = {Computed tomography links together: A wide range of applications enables interdisciplinary collaborations with research, industry and business},
  booktitle = {Proceedings FFH 2013},
  year = {2013},
  pages = {480-483}
}
Plank B, Ellert F, Gruber J, Gusenbauer C and Kastner J (2013), "Detection of defects in carbon fiber reinforced polymers by means of visual inspection, ultrasonic testing, digital radiography, active thermography and X-ray computed tomography.", In DGZfP Annual Conference 2013. Dresden, Germany, May, 2013. , pp. 9.
BibTeX:
@inproceedings{2013_Planka,
  author = {B. Plank and F. Ellert and J. Gruber and C. Gusenbauer and J. Kastner},
  title = {Detection of defects in carbon fiber reinforced polymers by means of visual inspection, ultrasonic testing, digital radiography, active thermography and X-ray computed tomography.},
  booktitle = {DGZfP Annual Conference 2013},
  year = {2013},
  pages = {9}
}
Reh A, Plank B, Kastner J, Gröller E and Heinzl C (2013), "Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers", In 1st International Conference on Tomography of Materials and Structures (ICTMS 2013). Ghent, Belgium, July, 2013. , pp. 4.
BibTeX:
@inproceedings{2013_Reh,
  author = {A. Reh and B. Plank and J. Kastner and E. Gröller and C. Heinzl},
  title = {Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers},
  booktitle = {1st International Conference on Tomography of Materials and Structures (ICTMS 2013)},
  year = {2013},
  pages = {4}
}
Reh A, Gusenbauer C, Kastner J, Gröller E and Heinzl C (2013), "MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data", IEEE Transactions on Visualization and Computer Graphics (TVCG)., December, 2013. Vol. 19(12), pp. 2906-2915.
BibTeX:
@article{2013_Reha,
  author = {A. Reh and C. Gusenbauer and J. Kastner and E. Gröller and C. Heinzl},
  title = {MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data},
  journal = {IEEE Transactions on Visualization and Computer Graphics (TVCG)},
  year = {2013},
  volume = {19},
  number = {12},
  pages = {2906-2915}
}
Revol V, Plank B, Kaufmann R, Kastner J, Kottler C and Neels A (2013), "Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer", NDT & E INTERNATIONAL., May, 2013. Vol. 58, pp. 64-71.
BibTeX:
@article{2013_Revol,
  author = {V. Revol and B. Plank and R. Kaufmann and J. Kastner and C. Kottler and A. Neels},
  title = {Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer},
  journal = {NDT & E INTERNATIONAL},
  year = {2013},
  volume = {58},
  pages = {64-71}
}
Salaberger D, Gleiß S and Kastner J (2013), "Comparison of methods to determine fibre length distribution: X-ray CT versus standard method", In Int. Conf. Structural Analysis of Advanced Materials. Kos, Greece, September, 2013.
BibTeX:
@inproceedings{2013_Salaberger,
  author = {D. Salaberger and S. Gleiß and J. Kastner},
  title = {Comparison of methods to determine fibre length distribution: X-ray CT versus standard method},
  booktitle = {Int. Conf. Structural Analysis of Advanced Materials},
  year = {2013}
}
Salaberger D, Oberpeilsteiner S, Kastner J, Koch T and Palmstingl M (2013), "Modelling of damage mechanisms of short fibre reinforced polymers using X-ray CT", In Conference Materials Testing 2013. Neu-Ulm, Germany, November, 2013. , pp. 217-222.
BibTeX:
@inproceedings{2013_Salabergera,
  author = {D. Salaberger and S. Oberpeilsteiner and J. Kastner and T. Koch and M. Palmstingl},
  title = {Modelling of damage mechanisms of short fibre reinforced polymers using X-ray CT},
  booktitle = {Conference Materials Testing 2013},
  year = {2013},
  pages = {217-222}
}
Wieland S, Gruenewald T, Ostrowski S, Plank B, Standfest G, Mies B and Petutschnigg A (2013), "Assessment of mechanical properties of wood-leather panels and the differences in the panel structure by means of X-ray computed tomography", BioResources., February, 2013. Vol. 8(1), pp. 818-832.
BibTeX:
@article{2013_Wieland,
  author = {S. Wieland and T. Gruenewald and S. Ostrowski and B. Plank and G. Standfest and B. Mies and A. Petutschnigg},
  title = {Assessment of mechanical properties of wood-leather panels and the differences in the panel structure by means of X-ray computed tomography},
  journal = {BioResources},
  year = {2013},
  volume = {8},
  number = {1},
  pages = {818-832}
}
Amirkhanov A, Reiter M, Kastner J, Gröller E and Heinzl C (2012), "Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components", In Conference on Industrial Computed Tomography. Wels, Austria, September, 2012. , pp. 279-287.
BibTeX:
@inproceedings{2012_Amirkhanov,
  author = {A. Amirkhanov and M. Reiter and J. Kastner and E. Gröller and C. Heinzl},
  title = {Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components},
  booktitle = {Conference on Industrial Computed Tomography},
  year = {2012},
  pages = {279-287}
}
Charwat-Pessler J, Wernersoon E, Plank B, Musso M, Schuller-Götzburg P, Standfest G, Mies B and Petutschnigg A (2012), "3D Analysis of heterogenous and biogenic structures based on bone augmentation material", In Conference on Industrial Computed Tomography. Wels, Austria, September, 2012. , pp. 339-341.
BibTeX:
@inproceedings{2012_Charwat-Pessler,
  author = {J. Charwat-Pessler and E. Wernersoon and B. Plank and M. Musso and P. Schuller-Götzburg and G. Standfest and B. Mies and A. Petutschnigg},
  title = {3D Analysis of heterogenous and biogenic structures based on bone augmentation material},
  booktitle = {Conference on Industrial Computed Tomography},
  year = {2012},
  pages = {339-341}
}
Großeiber S, Requena G, Kozeschnik E, Gusenbauer C and Ilie S (2012), "Correlation between hot ductility and damage in microalloyed steel slabs", In Conference on Industrial Computed Tomography. Wels, Austria, September, 2012. , pp. 61-68.
BibTeX:
@inproceedings{2012_Grosseiber,
  author = {S. Großeiber and G. Requena and E. Kozeschnik and C. Gusenbauer and S. Ilie},
  title = {Correlation between hot ductility and damage in microalloyed steel slabs},
  booktitle = {Conference on Industrial Computed Tomography},
  year = {2012},
  pages = {61-68}
}
Heinzl C, Kastner J, Amirkhanov A, Gröller E and Gusenbauer C (2012), "Optimal Specimen Placement in Cone Beam X-ray Computed Tomography", NDT & E INTERNATIONAL., May, 2012. Vol. 99(99), pp. 1-25.
BibTeX:
@article{2012_Heinzl,
  author = {C. Heinzl and J. Kastner and A. Amirkhanov and E. Gröller and C. Gusenbauer},
  title = {Optimal Specimen Placement in Cone Beam X-ray Computed Tomography},
  journal = {NDT & E INTERNATIONAL},
  year = {2012},
  volume = {99},
  number = {99},
  pages = {1-25}
}
Heise B, Schausberger S, Häuser S, Plank B, Salaberger D, Leiss-Holzinger E and Stifter D (2012), "Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research", OPTICAL FIBER TECHNOLOGY., September, 2012. Vol. 18(5), pp. 403-410.
BibTeX:
@article{2012_Heise,
  author = {B. Heise and S. Schausberger and S. Häuser and B. Plank and D. Salaberger and E. Leiss-Holzinger and D. Stifter},
  title = {Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research},
  journal = {OPTICAL FIBER TECHNOLOGY},
  year = {2012},
  volume = {18},
  number = {5},
  pages = {403-410}
}
Jerabek M, Reiter M, Herbst H, Plank B, Salaberger D and Major Z (2012), "Characterization of short fiber reinforced polypropylene composites", In Conference on Industrial Computed Tomography. Wels, Austria, September, 2012. , pp. 55-58.
BibTeX:
@inproceedings{2012_Jerabek,
  author = {M. Jerabek and M. Reiter and H. Herbst and B. Plank and D. Salaberger and Z. Major},
  title = {Characterization of short fiber reinforced polypropylene composites},
  booktitle = {Conference on Industrial Computed Tomography},
  year = {2012},
  pages = {55-58}
}
Kastner J, Plank B, Gusenbauer C, Harrer B and Requena G (2012), "3d-Microstructure investigations on light metal alloys by means of X-ray computed tomography", In Proceedings 7. Ranshofener Leichtmetalltage. Gmunden, Austria, November, 2012.
BibTeX:
@inproceedings{2012_Kastner,
  author = {J. Kastner and B. Plank and C. Gusenbauer and B. Harrer and G. Requena},
  title = {3d-Microstructure investigations on light metal alloys by means of X-ray computed tomography},
  booktitle = {Proceedings 7. Ranshofener Leichtmetalltage},
  year = {2012}
}
Kastner J, Salaberger D, Plank B, Reh A and Heinzl C (2012), "Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers", In Proceedings 4th International symposium on NDT in Aerospace. Augsburg, Germany, November, 2012.
BibTeX:
@inproceedings{2012_Kastnera,
  author = {J. Kastner and D. Salaberger and B. Plank and A. Reh and C. Heinzl},
  title = {Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers},
  booktitle = {Proceedings 4th International symposium on NDT in Aerospace},
  year = {2012}
}
Kastner J, Plank B, Revol V and Kottler C (2012), "Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials", In Proceedings of 12th World Conference on Non-Destructive Testing. Durban, South Africa, April, 2012. , pp. 9.
BibTeX:
@inproceedings{2012_Kastnerb,
  author = {J. Kastner and B. Plank and V. Revol and C. Kottler},
  title = {Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials},
  booktitle = {Proceedings of 12th World Conference on Non-Destructive Testing},
  year = {2012},
  pages = {9}
}
Kastner J (2012), "Editor", In Proceedings Conference on Industrial Computed Tomography 2012. Wels, Austria, September, 2012.
BibTeX:
@inproceedings{2012_Kastnerc,
  author = {J. Kastner},
  title = {Editor},
  booktitle = {Proceedings Conference on Industrial Computed Tomography 2012},
  year = {2012}
}
Kastner J, Salaberger D and Plank B (2012), "High resolution X-ray computed tomography of fibre and particle filled polymers", In Proceedings of 12th World Conference on Non-Destructive Testing. Durban, South Africa, April, 2012. , pp. 9.
BibTeX:
@inproceedings{2012_Kastnerd,
  author = {J. Kastner and D. Salaberger and B. Plank},
  title = {High resolution X-ray computed tomography of fibre and particle filled polymers},
  booktitle = {Proceedings of 12th World Conference on Non-Destructive Testing},
  year = {2012},
  pages = {9}
}
Kastner J, Salaberger D and Plank B (2012), "High resolution X-ray computed tomography of fibre and particle reinforced plastics", In DACH NDT Annual Meeting 2012. Graz, Austria, September, 2012.
BibTeX:
@inproceedings{2012_Kastnere,
  author = {J. Kastner and D. Salaberger and B. Plank},
  title = {High resolution X-ray computed tomography of fibre and particle reinforced plastics},
  booktitle = {DACH NDT Annual Meeting 2012},
  year = {2012}
}
Kastner J, Harrer B and Requena G (2012), "Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography", In Proceedings of 12th World Conference on Non-Destructive Testing. Durban, South Africa, April, 2012.
BibTeX:
@inproceedings{2012_Kastnerf,
  author = {J. Kastner and B. Harrer and G. Requena},
  title = {Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography},
  booktitle = {Proceedings of 12th World Conference on Non-Destructive Testing},
  year = {2012}
}
Kastner J, Plank B and Requena G (2012), "Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography", MATERIALS CHARACTERIZATION., February, 2012. Vol. 64(2), pp. 79-87.
BibTeX:
@article{2012_Kastnerg,
  author = {J. Kastner and B. Plank and G. Requena},
  title = {Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography},
  journal = {MATERIALS CHARACTERIZATION},
  year = {2012},
  volume = {64},
  number = {2},
  pages = {79-87}
}
Kastner J, Plank B and Salaberger D (2012), "Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung.", In Proceedings FFH 2012. Graz, Austria, April, 2012.
BibTeX:
@inproceedings{2012_Kastnerh,
  author = {J. Kastner and B. Plank and D. Salaberger},
  title = {Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung.},
  booktitle = {Proceedings FFH 2012},
  year = {2012}
}
Kastner K and Ostermayer G (2012), "Routing with Free Geodata on Mobile Devices", LECTURE NOTES IN COMPUTER SCIENCE., February, 2012. Vol. 6927(1), pp. 552-559.
BibTeX:
@article{2012_Kastneri,
  author = {K. Kastner and G. Ostermayer},
  title = {Routing with Free Geodata on Mobile Devices},
  journal = {LECTURE NOTES IN COMPUTER SCIENCE},
  year = {2012},
  volume = {6927},
  number = {1},
  pages = {552-559}
}
Kastner J (2012), "X-ray computed tomography for the development of materials and components". Thesis at: Technische Universität Wien, Austria.
BibTeX:
@phdthesis{2012_Kastnerj,
  author = {J. Kastner},
  title = {X-ray computed tomography for the development of materials and components},
  school = {Technische Universität Wien, Austria},
  year = {2012}
}
Koch T and Salaberger D (2012), "Methods for Characterizing the 3-D Morphology of Polymer Composites", MACROMOLECULAR SYMPOSIA., May, 2012. Vol. 315(1), pp. 115-124.
BibTeX:
@article{2012_Koch,
  author = {T. Koch and D. Salaberger},
  title = {Methods for Characterizing the 3-D Morphology of Polymer Composites},
  journal = {MACROMOLECULAR SYMPOSIA},
  year = {2012},
  volume = {315},
  number = {1},
  pages = {115-124}
}
Mayr G, Hendorfer G, Plank B and Sekelja J (2012), "Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models", In American Institute of Physics Conference Proceedings Vol. 1511. Denver / Colorado, Austria, July, 2012. , pp. 8.
BibTeX:
@inproceedings{2012_Mayr,
  author = {G. Mayr and G. Hendorfer and B. Plank and J. Sekelja},
  title = {Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models},
  booktitle = {American Institute of Physics Conference Proceedings Vol. 1511},
  year = {2012},
  pages = {8}
}
Plank B (2012), "From the granules to injection-molded component: Influence of the injection moulding process chain on Fiber length distribution determined by X-ray computed tomography.". Thesis at: FH OÖ Studienbetriebs GmbH, Austria. , pp. 150.
BibTeX:
@techreport{2012_Plank,
  author = {B. Plank},
  title = {From the granules to injection-molded component: Influence of the injection moulding process chain on Fiber length distribution determined by X-ray computed tomography.},
  school = {FH OÖ Studienbetriebs GmbH, Austria},
  year = {2012},
  pages = {150}
}
Qureshi H, Malik M, Ahmad MA and Heinzl C (2012), "Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data", In 20-th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision 2012. Pilzen, Tschechische Republik, Czech Republic, June, 2012. , pp. 367-375.
BibTeX:
@inproceedings{2012_Qureshi,
  author = {H. Qureshi and M. Malik and M. Anas Ahmad and C. Heinzl},
  title = {Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data},
  booktitle = {20-th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision 2012},
  year = {2012},
  pages = {367-375}
}
Reh A, Plank B, Kastner J, Gröller E and Heinzl C (2012), "Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers", COMPUTER GRAPHICS FORUM., June, 2012. Vol. 31(3), pp. 1185-1194.
BibTeX:
@article{2012_Reh,
  author = {A. Reh and B. Plank and J. Kastner and E. Gröller and C. Heinzl},
  title = {Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers},
  journal = {COMPUTER GRAPHICS FORUM},
  year = {2012},
  volume = {31},
  number = {3},
  pages = {1185-1194}
}
Reiter M, Krumm M, Kasperl S, Kuhn C, Weiss D, Erler M, Gusenbauer C, Heinzl C and Kastner J (2012), "Evaluation of transmission based image quality optimisation for X-ray computed tomography", In Conference on Industrial Computed Tomography. Wels, Austria, September, 2012. , pp. 241-250.
BibTeX:
@inproceedings{2012_Reiter,
  author = {M. Reiter and M. Krumm and S. Kasperl and C. Kuhn and D. Weiss and M. Erler and C. Gusenbauer and C. Heinzl and J. Kastner},
  title = {Evaluation of transmission based image quality optimisation for X-ray computed tomography},
  booktitle = {Conference on Industrial Computed Tomography},
  year = {2012},
  pages = {241-250}
}
Salaberger D, Scharleitner H and Kastner J (2012), "Analysis of ink distribution in polymer foams by X-ray computed tomography", In DACH NDT Annual Meeting 2012. Graz, Austria, September, 2012.
BibTeX:
@inproceedings{2012_Salaberger,
  author = {D. Salaberger and H. Scharleitner and J. Kastner},
  title = {Analysis of ink distribution in polymer foams by X-ray computed tomography},
  booktitle = {DACH NDT Annual Meeting 2012},
  year = {2012}
}
Salaberger D, Koch T and Kastner J (2012), "Comparison of particle size distributions derived from 2D and 3D analysis for particle filled polymers", In Polychar20. Dubrovnik, Croatia, March, 2012. , pp. 95-95.
BibTeX:
@inproceedings{2012_Salabergera,
  author = {D. Salaberger and T. Koch and J. Kastner},
  title = {Comparison of particle size distributions derived from 2D and 3D analysis for particle filled polymers},
  booktitle = {Polychar20},
  year = {2012},
  pages = {95-95}
}
Standfest G, Kutnar A, Plank B, Petutschnigg A, Kamke F and Dunky M (2012), "Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography", WOOD SCIENCE AND TECHNOLOGY., July, 2012. Vol. 46(4), pp. 19.
BibTeX:
@article{2012_Standfest,
  author = {G. Standfest and A. Kutnar and B. Plank and A. Petutschnigg and F. Kamke and M. Dunky},
  title = {Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography},
  journal = {WOOD SCIENCE AND TECHNOLOGY},
  year = {2012},
  volume = {46},
  number = {4},
  pages = {19}
}
Standfest G, Dunky M, Kranzer S, Plank B, Salaberger D and Petutschnigg A (2012), "3D pore size characterisation by means of image analysis and mathematical morphology", JOURNAL ''HOLZTECHNOLOGIE''., May, 2012. Vol. 53(5), pp. 39-45.
BibTeX:
@article{2012_Standfesta,
  author = {G. Standfest and M. Dunky and S. Kranzer and B. Plank and D. Salaberger and A. Petutschnigg},
  title = {3D pore size characterisation by means of image analysis and mathematical morphology},
  journal = {JOURNAL ''HOLZTECHNOLOGIE''},
  year = {2012},
  volume = {53},
  number = {5},
  pages = {39-45}
}
Taylor A, Plank B, Standfest G and Petutschnigg A (2012), "Beech wood shrinkage observed at the micro-scale by a time series of X-ray computed tomographs (μXCT)", HOLZFORSCHUNG., September, 2012. Vol. 67(2), pp. 201-205.
BibTeX:
@article{2012_Taylor,
  author = {A. Taylor and B. Plank and G. Standfest and A. Petutschnigg},
  title = {Beech wood shrinkage observed at the micro-scale by a time series of X-ray computed tomographs (μXCT)},
  journal = {HOLZFORSCHUNG},
  year = {2012},
  volume = {67},
  number = {2},
  pages = {201-205}
}
Tóth M, Moser G and Gusenbauer C (2012), "Analysis of the middle ear mechanics with micro-CT", In Conference on Industrial Computed Tomography. Wels, Austria, September, 2012. , pp. 307-310.
BibTeX:
@inproceedings{2012_Toth,
  author = {M. Tóth and G. Moser and C. Gusenbauer},
  title = {Analysis of the middle ear mechanics with micro-CT},
  booktitle = {Conference on Industrial Computed Tomography},
  year = {2012},
  pages = {307-310}
}
Traxler R, Gerschberger M, Engelhardt-Nowitzki C and Hohensinn R (2012), "Logistische Leitplanken – Über Materialflussberwertung zur Sollprozessgestaltung".
BibTeX:
@misc{2012_Traxler,
  author = {R. Traxler and M. Gerschberger and C. Engelhardt-Nowitzki and R. Hohensinn},
  title = {Logistische Leitplanken – Über Materialflussberwertung zur Sollprozessgestaltung},
  year = {2012},
  pages = {1-5}
}
Amirkhanov A, Heinzl C, Reiter M, Kastner J and Gröller E (2011), "Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography", IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS., December, 2011. Vol. 17(12), pp. 2193-2202.
BibTeX:
@article{2011_Amirkhanov,
  author = {A. Amirkhanov and C. Heinzl and M. Reiter and J. Kastner and E. Gröller},
  title = {Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography},
  journal = {IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS},
  year = {2011},
  volume = {17},
  number = {12},
  pages = {2193-2202}
}
Gruber J, Mayr G, Hendorfer G, Sekelja J and Plank B (2011), "Digital Shearography & Active Thermography - New Methods for Non-Destructive Testing in the Aviation Industrie", In Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences. Wien (Favoriten), Austria, April, 2011. , pp. 248-251.
BibTeX:
@inproceedings{2011_Gruber,
  author = {J. Gruber and G. Mayr and G. Hendorfer and J. Sekelja and B. Plank},
  title = {Digital Shearography & Active Thermography - New Methods for Non-Destructive Testing in the Aviation Industrie},
  booktitle = {Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences},
  year = {2011},
  pages = {248-251}
}
Harrer B and Kastner J (2011), "X-ray Microtomography: characterisation of structures and defect analysis", In Fabrication and Characterization in the Micro-Nano Range. , pp. 119-150. Springer Verlag.
BibTeX:
@incollection{2011_Harrer,
  author = {B. Harrer and J. Kastner},
  title = {X-ray Microtomography: characterisation of structures and defect analysis},
  booktitle = {Fabrication and Characterization in the Micro-Nano Range},
  publisher = {Springer Verlag},
  year = {2011},
  pages = {119-150},
  edition = {2011}
}
Heinzl C, Kastner J, Amirkhanov A, Gröller E and Reiter M (2011), "Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography", In International Symposium on Digital Industrial Radiology and Computed Tomography 2011. Berlin, Germany, June, 2011.
BibTeX:
@inproceedings{2011_Heinzl,
  author = {C. Heinzl and J. Kastner and A. Amirkhanov and E. Gröller and M. Reiter},
  title = {Fast Estimation of Optimal Specimen Placements in 3D X-ray Computed Tomography},
  booktitle = {International Symposium on Digital Industrial Radiology and Computed Tomography 2011},
  year = {2011}
}
Heiss E, Natchev N and Salaberger D (2011), "Oropharyngeal morphology in the basal tortoise Manouria emys emys with comments on form and function of the testudinid tongue", JOURNAL OF MORPHOLOGY., May, 2011. Vol. 272(272)
BibTeX:
@article{2011_Heiss,
  author = {E. Heiss and N. Natchev and D. Salaberger},
  title = {Oropharyngeal morphology in the basal tortoise Manouria emys emys with comments on form and function of the testudinid tongue},
  journal = {JOURNAL OF MORPHOLOGY},
  year = {2011},
  volume = {272},
  number = {272}
}
Hochegger M, Harrer B, Degischer H and Ilie S (2011), "Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen", In Materialographie Metalle - Keramik -Polymere. Karlsruhe, Germany, September, 2011. , pp. 1-6.
BibTeX:
@inproceedings{2011_Hochegger,
  author = {M. Hochegger and B. Harrer and H. Degischer and S. Ilie},
  title = {Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen},
  booktitle = {Materialographie Metalle - Keramik -Polymere},
  year = {2011},
  pages = {1-6}
}
Kastner J, Harrer B and Degischer H (2011), "High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys", MATERIALS CHARACTERIZATION., January, 2011. Vol. 62(1), pp. 99-107.
BibTeX:
@article{2011_Kastner,
  author = {J. Kastner and B. Harrer and H. Degischer},
  title = {High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys},
  journal = {MATERIALS CHARACTERIZATION},
  year = {2011},
  volume = {62},
  number = {1},
  pages = {99-107}
}
Kastner J, Kickinger R and Salaberger D (2011), "High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam", JOURNAL OF CELLULAR PLASTICS., November, 2011. Vol. 47(1), pp. 567-578.
BibTeX:
@article{2011_Kastnera,
  author = {J. Kastner and R. Kickinger and D. Salaberger},
  title = {High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam},
  journal = {JOURNAL OF CELLULAR PLASTICS},
  year = {2011},
  volume = {47},
  number = {1},
  pages = {567-578}
}
Kastner J, Plank B and Salaberger D (2011), "Phase contrast imaging with high resolution cone beam X-ray computed tomography", In International Symposium on Digital Industrial Radiology and Computed Tomography 2011. Berlin, Germany, June, 2011.
BibTeX:
@inproceedings{2011_Kastnerb,
  author = {J. Kastner and B. Plank and D. Salaberger},
  title = {Phase contrast imaging with high resolution cone beam X-ray computed tomography},
  booktitle = {International Symposium on Digital Industrial Radiology and Computed Tomography 2011},
  year = {2011}
}
Kastner K and Ostermayer G (2011), "Routing with Free Geodata on Mobile Devices", In Proceedings of the 13th International Conference on Computer Aided Systems Theory (EUROCAST 2011). Las Palmas de Gran Canaria, Spain, February, 2011. , pp. 401-402.
BibTeX:
@inproceedings{2011_Kastnerc,
  author = {K. Kastner and G. Ostermayer},
  title = {Routing with Free Geodata on Mobile Devices},
  booktitle = {Proceedings of the 13th International Conference on Computer Aided Systems Theory (EUROCAST 2011)},
  year = {2011},
  pages = {401-402}
}
Mayr G, Plank B, Sekelja J and Hendorfer G (2011), "Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers", NDT & E INTERNATIONAL., November, 2011. Vol. 44(7), pp. 537-543.
BibTeX:
@article{2011_Mayr,
  author = {G. Mayr and B. Plank and J. Sekelja and G. Hendorfer},
  title = {Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers},
  journal = {NDT & E INTERNATIONAL},
  year = {2011},
  volume = {44},
  number = {7},
  pages = {537-543}
}
Natchev N, Heiss E and Salaberger D (2011), "Structure and function of the feeding apparatus in the common musk turtle Sternotherus odoratus (Chelonia, Kinosternidae)", CONTRIBUTIONS TO ZOOLOGY., January, 2011. Vol. 80(2), pp. 143-156.
BibTeX:
@article{2011_Natchev,
  author = {N. Natchev and E. Heiss and D. Salaberger},
  title = {Structure and function of the feeding apparatus in the common musk turtle Sternotherus odoratus (Chelonia, Kinosternidae)},
  journal = {CONTRIBUTIONS TO ZOOLOGY},
  year = {2011},
  volume = {80},
  number = {2},
  pages = {143-156}
}
Plank B, Harrer B, Salaberger D and Kastner J (2011), "Non-destructive characterization of heterogeneous materials in sub-micron range using Cone-beam X-ray computed tomography", In Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences. Wien (Favoriten), Austria, April, 2011. , pp. 232-235.
BibTeX:
@inproceedings{2011_Plank,
  author = {B. Plank and B. Harrer and D. Salaberger and J. Kastner},
  title = {Non-destructive characterization of heterogeneous materials in sub-micron range using Cone-beam X-ray computed tomography},
  booktitle = {Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences},
  year = {2011},
  pages = {232-235}
}
Reiter M, Harrer B, Salaberger D, Heinzl C, Gusenbauer C, Kuhn C and Kastner J (2011), "Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation", In International Symposium on Digital Industrial Radiology and Computed Tomography 2011. Berlin, Germany, June, 2011.
BibTeX:
@inproceedings{2011_Reiter,
  author = {M. Reiter and B. Harrer and D. Salaberger and C. Heinzl and C. Gusenbauer and C. Kuhn and J. Kastner},
  title = {Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation},
  booktitle = {International Symposium on Digital Industrial Radiology and Computed Tomography 2011},
  year = {2011}
}
Rodriguez-Hortala M, Salaberger D, Hernandez S, Kastner J and Degischer H (2011), "Characterisation of defects in carbon fibre reinforced polymers (CFRP)", In DGM Composite materials. Chemnitz, Germany, March, 2011. , pp. 208-215.
BibTeX:
@inproceedings{2011_Rodriguez-Hortala,
  author = {M. Rodriguez-Hortala and D. Salaberger and S. Hernandez and J. Kastner and H. Degischer},
  title = {Characterisation of defects in carbon fibre reinforced polymers (CFRP)},
  booktitle = {DGM Composite materials},
  year = {2011},
  pages = {208-215}
}
Salaberger D, Kannappan KA, Kastner J, Reussner J and Auinger T (2011), "Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution", INTERNATIONAL POLYMER PROCESSING., July, 2011. Vol. 26(3), pp. 283-291.
BibTeX:
@article{2011_Salaberger,
  author = {D. Salaberger and K. Arunachalam Kannappan and J. Kastner and J. Reussner and T. Auinger},
  title = {Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution},
  journal = {INTERNATIONAL POLYMER PROCESSING},
  year = {2011},
  volume = {26},
  number = {3},
  pages = {283-291}
}
Amirkhanov A, Heinzl C, Reiter M and Gröller E (2010), "Visual optimality and stability analysis of 3DCT scan positions", IEEE Transactions on Visualization and Computer Graphics. Vol. 16(6), pp. 1477-1486.
BibTeX:
@article{2010_Amirkhanov,
  author = {A. Amirkhanov and C. Heinzl and M. Reiter and E. Gröller},
  title = {Visual optimality and stability analysis of 3DCT scan positions},
  journal = {IEEE Transactions on Visualization and Computer Graphics},
  year = {2010},
  volume = {16},
  number = {6},
  pages = {1477-1486}
}
Chyba B, Mantler M and Reiter M (2010), "Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography", Powder Diffraction Journal. Vol. 25(2), pp. 165-168.
BibTeX:
@article{2010_Chyba,
  author = {B. Chyba and M. Mantler and M. Reiter},
  title = {Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography},
  journal = {Powder Diffraction Journal},
  year = {2010},
  volume = {25},
  number = {2},
  pages = {165-168}
}
Crespo-Casanova J, Degischer H, Ladron C, Maire E, Track K and Harrer B (2010), "In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl", In Industrial Computed Tomography 2010. Wels, Austria, September, 2010.
BibTeX:
@inproceedings{2010_Crespo-Casanova,
  author = {J. Crespo-Casanova and H. Degischer and C. Ladron and E. Maire and K. Track and B. Harrer},
  title = {In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl},
  booktitle = {Industrial Computed Tomography 2010},
  year = {2010}
}
Crespo-Casanova J, Degischer H, Ladron C, Maire E, Track K and Harrer B (2010), "Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl", In Tagung Werkstoffprüfung 2010. Neu-Ulm, Germany, December, 2010.
BibTeX:
@inproceedings{2010_Crespo-Casanovaa,
  author = {J. Crespo-Casanova and H. Degischer and C. Ladron and E. Maire and K. Track and B. Harrer},
  title = {Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl},
  booktitle = {Tagung Werkstoffprüfung 2010},
  year = {2010}
}
Harrer B, Kastner J and Degischer H (2010), "MICROFOCUS COMPUTED X-RAY TOMOGRAPHY OF SEGREGATIONS IN HIGH STRENGTH ALUMINIUM ALLOYS", In Proc. of 10th European Conference on Non-Destructive Testing. Moskau, Russian Federation, June, 2010.
BibTeX:
@inproceedings{2010_Harrer,
  author = {B. Harrer and J. Kastner and H. Degischer},
  title = {MICROFOCUS COMPUTED X-RAY TOMOGRAPHY OF SEGREGATIONS IN HIGH STRENGTH ALUMINIUM ALLOYS},
  booktitle = {Proc. of 10th European Conference on Non-Destructive Testing},
  year = {2010}
}
Heinzl C, Reiter M, Kastner J and Gröller E (2010), "Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen", In DGZFP Yearly Conference 2010. Erfurt, Germany, May, 2010.
BibTeX:
@inproceedings{2010_Heinzl,
  author = {C. Heinzl and M. Reiter and J. Kastner and E. Gröller},
  title = {Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen},
  booktitle = {DGZFP Yearly Conference 2010},
  year = {2010}
}
Heinzl C, Malik MM and Gröller E (2010), "Comparative Visualization for Parameter Studies of Dataset Series", IEEE Transactions on Visualization and Computer Graphics (TVCG)., September, 2010. Vol. 16(5), pp. 829-840.
BibTeX:
@article{2010_Heinzla,
  author = {C. Heinzl and M. M. Malik and E. Gröller},
  title = {Comparative Visualization for Parameter Studies of Dataset Series},
  journal = {IEEE Transactions on Visualization and Computer Graphics (TVCG)},
  year = {2010},
  volume = {16},
  number = {5},
  pages = {829-840}
}
Heinzl C, Kastner J and Gröller E (2010), "Uncertainty Visualization of Computed Tomography Datasets from Industrial Components", In Proc. of 10th European Conference on Non-Destructive Testing. Moskau, Russian Federation, June, 2010.
BibTeX:
@inproceedings{2010_Heinzlb,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {Uncertainty Visualization of Computed Tomography Datasets from Industrial Components},
  booktitle = {Proc. of 10th European Conference on Non-Destructive Testing},
  year = {2010}
}
Heinzl C, Amirkhanov A, Reiter M and Gröller E (2010), "Visual Optimality and Stability Analysis of 3DCT Scan Positions", IEEE Transactions on Visualization and Computer Graphics (TVCG)., October, 2010. Vol. 16(6)
BibTeX:
@article{2010_Heinzlc,
  author = {C. Heinzl and A. Amirkhanov and M. Reiter and E. Gröller},
  title = {Visual Optimality and Stability Analysis of 3DCT Scan Positions},
  journal = {IEEE Transactions on Visualization and Computer Graphics (TVCG)},
  year = {2010},
  volume = {16},
  number = {6}
}
Heiss E and Salaberger D (2010), "Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl", JOURNAL OF ZOOLOGY., February, 2010. Vol. 280(2), pp. 156-162.
BibTeX:
@article{2010_Heiss,
  author = {E. Heiss and D. Salaberger},
  title = {Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl},
  journal = {JOURNAL OF ZOOLOGY},
  year = {2010},
  volume = {280},
  number = {2},
  pages = {156-162}
}
Hochegger M, Harrer B, Illie S and Degischer H (2010), "Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie", In Industrial Computed Tomography 2010. Wels, Austria, September, 2010.
BibTeX:
@inproceedings{2010_Hochegger,
  author = {M. Hochegger and B. Harrer and S. Illie and H. Degischer},
  title = {Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie},
  booktitle = {Industrial Computed Tomography 2010},
  year = {2010}
}
Kastner J, Harrer B, Requena G and Brunke O (2010), "Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys", NDT & E INTERNATIONAL., October, 2010. Vol. 43(10), pp. 599-605.
BibTeX:
@article{2010_Kastner,
  author = {J. Kastner and B. Harrer and G. Requena and O. Brunke},
  title = {Comparative study of micro- and Sub-µm computed tomography with synchrotron tomography applied to Fe- and Al-alloys},
  journal = {NDT & E INTERNATIONAL},
  year = {2010},
  volume = {43},
  number = {10},
  pages = {599-605}
}
Kastner J, Harrer B and Traxler H (2010), "COMPUTED TOMOGRAPHY AND PULSED THERMOGRAPHY OF CARBON REINFORCED CARBON/COPPER COMPONENTS FOR THERMONUCLEAR FUSION", In Proc. of 10th European Conference on Non-Destructive Testing. Moskau, Russian Federation, June, 2010.
BibTeX:
@inproceedings{2010_Kastnera,
  author = {J. Kastner and B. Harrer and H. Traxler},
  title = {COMPUTED TOMOGRAPHY AND PULSED THERMOGRAPHY OF CARBON REINFORCED CARBON/COPPER COMPONENTS FOR THERMONUCLEAR FUSION},
  booktitle = {Proc. of 10th European Conference on Non-Destructive Testing},
  year = {2010}
}
Kastner J, Plank B, Salaberger D and Sekelja J (2010), "Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography", In 2nd Int. Symposium on NDT in Aerospace. Hamburg, D, Germany, November, 2010.
BibTeX:
@inproceedings{2010_Kastnerb,
  author = {J. Kastner and B. Plank and D. Salaberger and J. Sekelja},
  title = {Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography},
  booktitle = {2nd Int. Symposium on NDT in Aerospace},
  year = {2010}
}
Kastner J, Zauner G, Kern T and Höfler L (2010), "Energyefficient Mobility", In Energyefficient Mobility. , pp. null. Shaker Verlag.
BibTeX:
@incollection{2010_Kastnerc,
  author = {J. Kastner and G. Zauner and T. Kern and L. Höfler},
  title = {Energyefficient Mobility},
  booktitle = {Energyefficient Mobility},
  publisher = {Shaker Verlag},
  year = {2010},
  pages = {null}
}
Kastner J (2010), "Industrial Computed Tomography", In Industrial Computed Tomography 2010. Wels, Austria, September, 2010.
BibTeX:
@inproceedings{2010_Kastnerd,
  author = {J. Kastner},
  title = {Industrial Computed Tomography},
  booktitle = {Industrial Computed Tomography 2010},
  year = {2010}
}
Kastner J, Salaberger D and Kickinger R (2010), "STRUCTURAL ANALYSIS OF POLYMERIC FOAMS BY SUB-µM X-RAY COMPUTED TOMOGRAPHY", In Proc. of 10th European Conference on Non-Destructive Testing. Moskau, Russian Federation, June, 2010.
BibTeX:
@inproceedings{2010_Kastnere,
  author = {J. Kastner and D. Salaberger and R. Kickinger},
  title = {STRUCTURAL ANALYSIS OF POLYMERIC FOAMS BY SUB-µM X-RAY COMPUTED TOMOGRAPHY},
  booktitle = {Proc. of 10th European Conference on Non-Destructive Testing},
  year = {2010}
}
Kastner J, Harrer B and Salaberger D (2010), "X-Ray Computed Tomography of materials for light-weight applications", In Energyefficient Mobility. , pp. null. Shaker Verlag.
BibTeX:
@incollection{2010_Kastnerf,
  author = {J. Kastner and B. Harrer and D. Salaberger},
  title = {X-Ray Computed Tomography of materials for light-weight applications},
  booktitle = {Energyefficient Mobility},
  publisher = {Shaker Verlag},
  year = {2010},
  pages = {null}
}
Kohlberger R, Gerschberger M and Traxler R (2010), "Bewertung von Materialflüssen - Identifikation & Anwendung logistischer Leitplanken".
BibTeX:
@misc{2010_Kohlberger,
  author = {R. Kohlberger and M. Gerschberger and R. Traxler},
  title = {Bewertung von Materialflüssen - Identifikation & Anwendung logistischer Leitplanken},
  year = {2010},
  pages = {16-19}
}
Müller S and Salaberger D (2010), "Analysis of a belt buckle from Mautern on a technical basis", Archaeology Austria., April, 2010. Vol. 21(1), pp. 60-65.
BibTeX:
@article{2010_Mueller,
  author = {S. Müller and D. Salaberger},
  title = {Analysis of a belt buckle from Mautern on a technical basis},
  journal = {Archaeology Austria},
  year = {2010},
  volume = {21},
  number = {1},
  pages = {60-65}
}
Plank B, Salaberger D and Kastner J (2010), "High Resolution X-ray CT for Polymer Materials Science", In 2nd Int. Symposium on NDT in Aerospace. Hamburg, D, Germany, November, 2010. , pp. 3.
BibTeX:
@inproceedings{2010_Plank,
  author = {B. Plank and D. Salaberger and J. Kastner},
  title = {High Resolution X-ray CT for Polymer Materials Science},
  booktitle = {2nd Int. Symposium on NDT in Aerospace},
  year = {2010},
  pages = {3}
}
Plank B, Sekelja J, Mayr G and Kastner J (2010), "Porositydetermination in aeronautic industry with x-ray computed tomography", In Proceedings Industrial Computed Tomography Symposium 2010. Wels, Austria, September, 2010. , pp. 25-34.
BibTeX:
@inproceedings{2010_Planka,
  author = {B. Plank and J. Sekelja and G. Mayr and J. Kastner},
  title = {Porositydetermination in aeronautic industry with x-ray computed tomography},
  booktitle = {Proceedings Industrial Computed Tomography Symposium 2010},
  year = {2010},
  pages = {25-34}
}
Plank B, Kastner J, Sekelja J and Salaberger D (2010), "Porositydetermination in carbon fibre reinforced polymers with x-ray computed tomography", In Proceedings of the FFH 2010. Pinkafeld, Austria, April, 2010. , pp. 321-328.
BibTeX:
@inproceedings{2010_Plankb,
  author = {B. Plank and J. Kastner and J. Sekelja and D. Salaberger},
  title = {Porositydetermination in carbon fibre reinforced polymers with x-ray computed tomography},
  booktitle = {Proceedings of the FFH 2010},
  year = {2010},
  pages = {321-328}
}
Reiter M and Kastner J (2010), "Saliera - Das Salzfass von Benvenuto Cellini". Thesis at: FH OÖ Fakultät Wels, Austria. , pp. 81-81.
BibTeX:
@techreport{2010_Reiter,
  author = {M. Reiter and J. Kastner},
  title = {Saliera - Das Salzfass von Benvenuto Cellini},
  school = {FH OÖ Fakultät Wels, Austria},
  year = {2010},
  pages = {81-81}
}
Reiter M, Heinzl C, Salaberger D, Weiss D and Kastner J (2010), "Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie", In Proceedings Industrial Computed Tomography Symposium 2010. Wels, Austria, September, 2010. , pp. 163-173.
BibTeX:
@inproceedings{2010_Reitera,
  author = {M. Reiter and C. Heinzl and D. Salaberger and D. Weiss and J. Kastner},
  title = {Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie},
  booktitle = {Proceedings Industrial Computed Tomography Symposium 2010},
  year = {2010},
  pages = {163-173}
}
Reiter M, Heinzl C, Salaberger D, Weiss D and Kastner J (2010), "Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations", In Proc. of 10th European Conference on Non-Destructive Testing. Moskau, Russian Federation, June, 2010.
BibTeX:
@inproceedings{2010_Reiterb,
  author = {M. Reiter and C. Heinzl and D. Salaberger and D. Weiss and J. Kastner},
  title = {Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations},
  booktitle = {Proc. of 10th European Conference on Non-Destructive Testing},
  year = {2010}
}
Rosner S, Konnerth J, Plank B, Salaberger D and Hansmann C (2010), "Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood", TREES-STRUCTURE AND FUNCTION., July, 2010. Vol. 24(5), pp. 931-940.
BibTeX:
@article{2010_Rosner,
  author = {S. Rosner and J. Konnerth and B. Plank and D. Salaberger and C. Hansmann},
  title = {Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce sapwood},
  journal = {TREES-STRUCTURE AND FUNCTION},
  year = {2010},
  volume = {24},
  number = {5},
  pages = {931-940}
}
Salaberger D, Plank B, Harrer B, Kastner J, Brunke O and Degischer H (2010), "Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability", In Book of Abstracts: High Resolution X-ray CT Symposium. Dresden, Germany, August, 2010. , pp. 37-37.
BibTeX:
@inproceedings{2010_Salaberger,
  author = {D. Salaberger and B. Plank and B. Harrer and J. Kastner and O. Brunke and H. Degischer},
  title = {Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability},
  booktitle = {Book of Abstracts: High Resolution X-ray CT Symposium},
  year = {2010},
  pages = {37-37}
}
Salaberger D, Kannappan KA, Kastner J, Reussner J and Auinger T (2010), "CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution", In PPS26-2010. Banff, Canada, Canada, July, 2010.
BibTeX:
@inproceedings{2010_Salabergera,
  author = {D. Salaberger and K. Arunachalam Kannappan and J. Kastner and J. Reussner and T. Auinger},
  title = {CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution},
  booktitle = {PPS26-2010},
  year = {2010}
}
Salaberger D, Kannappan KA and Kastner J (2010), "Method for the 3D characterisation of fibres in reinforced polymers", In Industrial Computed Tomography 2010. Wels, Austria, September, 2010. , pp. 51-58.
BibTeX:
@inproceedings{2010_Salabergerb,
  author = {D. Salaberger and K. Arunachalam Kannappan and J. Kastner},
  title = {Method for the 3D characterisation of fibres in reinforced polymers},
  booktitle = {Industrial Computed Tomography 2010},
  year = {2010},
  pages = {51-58}
}
Schöbel M, Paffenholz V, Harrer B, Michiel M and Degischer H (2010), "3D Characterization of Thermal Fatigue Damage in SiC Fiber Reinforced Copper", In Proc. of 13. Internationale Metallographie-Tagung. Leoben, Austria, September, 2010.
BibTeX:
@inproceedings{2010_Schoebel,
  author = {M. Schöbel and V. Paffenholz and B. Harrer and M. Michiel and H. Degischer},
  title = {3D Characterization of Thermal Fatigue Damage in SiC Fiber Reinforced Copper},
  booktitle = {Proc. of 13. Internationale Metallographie-Tagung},
  year = {2010}
}
Standfest G, Kranzer S, Plank B, Petutschnigg A and Dunky M (2010), "Application of sub-µm CT for the characterization of wood based panels", In Proceedings Industrial Computed Tomography Symposium 2010. Wels, Austria, September, 2010. , pp. 65-70.
BibTeX:
@inproceedings{2010_Standfest,
  author = {G. Standfest and S. Kranzer and B. Plank and A. Petutschnigg and M. Dunky},
  title = {Application of sub-µm CT for the characterization of wood based panels},
  booktitle = {Proceedings Industrial Computed Tomography Symposium 2010},
  year = {2010},
  pages = {65-70}
}
Standfest G, Plank B, Petutschnigg A and Dunky M (2010), "Characterization of Wood Based Panels With Sub-Micron Computed Tomography.", In FIRST SERBIAN FORESTRY CONGRESS. Belgrade, Serbia, November, 2010.
BibTeX:
@inproceedings{2010_Standfesta,
  author = {G. Standfest and B. Plank and A. Petutschnigg and M. Dunky},
  title = {Characterization of Wood Based Panels With Sub-Micron Computed Tomography.},
  booktitle = {FIRST SERBIAN FORESTRY CONGRESS},
  year = {2010}
}
Standfest G, Kranzer S, Salaberger D, Plank B, Petutschnigg A and Dunky M (2010), "3D Microstructure Characterization of Wood Based Panels", In Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries. Kuchl, Austria, October, 2010. , pp. 6.
BibTeX:
@inproceedings{2010_Standfestb,
  author = {G. Standfest and S. Kranzer and D. Salaberger and B. Plank and A. Petutschnigg and M. Dunky},
  title = {3D Microstructure Characterization of Wood Based Panels},
  booktitle = {Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries},
  year = {2010},
  pages = {6}
}
Standfest G, Salaberger D, Plank B, Petutschnigg A and Dunky M (2010), "Sub-micron-CT for the characterization of wood based panels", JOURNAL ''HOLZTECHNOLOGIE''., September, 2010. Vol. 51(4), pp. 44-49.
BibTeX:
@article{2010_Standfestc,
  author = {G. Standfest and D. Salaberger and B. Plank and A. Petutschnigg and M. Dunky},
  title = {Sub-micron-CT for the characterization of wood based panels},
  journal = {JOURNAL ''HOLZTECHNOLOGIE''},
  year = {2010},
  volume = {51},
  number = {4},
  pages = {44-49}
}
Wurm M, Hofer C, Traxler H, Zabernig A and Harrer B (2010), "Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie", In Industrial Computed Tomography 2010. Wels, Austria, September, 2010.
BibTeX:
@inproceedings{2010_Wurm,
  author = {M. Wurm and C. Hofer and H. Traxler and A. Zabernig and B. Harrer},
  title = {Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie},
  booktitle = {Industrial Computed Tomography 2010},
  year = {2010}
}
Chyba B, Mantler M and Reiter M (2009), "Monte-Carlo simulations for evaluation of different in-fluences on projections in computed tomography", In Proceedings of Denver X-Ray Conference.
BibTeX:
@inproceedings{2009_Chyba,
  author = {B. Chyba and M. Mantler and M. Reiter},
  title = {Monte-Carlo simulations for evaluation of different in-fluences on projections in computed tomography},
  booktitle = {Proceedings of Denver X-Ray Conference},
  year = {2009}
}
Grabner M and Salaberger D (2009), "The need of high resolution μ-X-ray CT in dendrochronology and in wood identification", In 6th International Symposium on Image and Signal Processing and Analysis. Salzburg, Austria, September, 2009. , pp. 349-352.
BibTeX:
@inproceedings{2009_Grabner,
  author = {M. Grabner and D. Salaberger},
  title = {The need of high resolution μ-X-ray CT in dendrochronology and in wood identification},
  booktitle = {6th International Symposium on Image and Signal Processing and Analysis},
  year = {2009},
  pages = {349-352}
}
Harrer B (2009), "Detectability of heterogeneities in iron - based and in aluminium alloys by". Thesis at: Technische Universität Wien, Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie, Austria. , pp. 1-229.
BibTeX:
@techreport{2009_Harrer,
  author = {B. Harrer},
  title = {Detectability of heterogeneities in iron - based and in aluminium alloys by},
  school = {Technische Universität Wien, Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie, Austria},
  year = {2009},
  pages = {1-229}
}
Heinzl C (2009), "Analysis and visualization of industrial CT data". Thesis at: Technische Universität Wien, Institut für Computergraphik und Algorithmen, Austria. , pp. 110.
BibTeX:
@techreport{2009_Heinzl,
  author = {C. Heinzl},
  title = {Analysis and visualization of industrial CT data},
  school = {Technische Universität Wien, Institut für Computergraphik und Algorithmen, Austria},
  year = {2009},
  pages = {110}
}
Heinzl C, Kastner J and Gröller E (2009), "Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components", In Denver X-Ray Conference 2009. Denver, United States of America, July, 2009. , pp. 8.
BibTeX:
@inproceedings{2009_Heinzla,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components},
  booktitle = {Denver X-Ray Conference 2009},
  year = {2009},
  pages = {8}
}
Heinzl C, Kastner J and Gröller E (2009), "Computed tomography of multi-material components and evaluation using statistical analysis", In Proceedings FFH 2009. Villach, Austria, April, 2009. , pp. 8.
BibTeX:
@inproceedings{2009_Heinzlb,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {Computed tomography of multi-material components and evaluation using statistical analysis},
  booktitle = {Proceedings FFH 2009},
  year = {2009},
  pages = {8}
}
Kastner J and Heinzl C (2009), "Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit", In Proceedings DGZfP annual conference 2009. Münster, Germany, May, 2009. , pp. 8.
BibTeX:
@inproceedings{2009_Kastner,
  author = {J. Kastner and C. Heinzl},
  title = {Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit},
  booktitle = {Proceedings DGZfP annual conference 2009},
  year = {2009},
  pages = {8}
}
Kastner J (2009), "Research and Development", In 15 years University of Applied Sciences in Austria. , pp. 172-190. Facultas.
BibTeX:
@incollection{2009_Kastnera,
  author = {J. Kastner},
  editor = {H. Holzinger and W. Jungwirth},
  title = {Research and Development},
  booktitle = {15 years University of Applied Sciences in Austria},
  publisher = {Facultas},
  year = {2009},
  pages = {172-190}
}
Mahringer C, Füreder M, Kastner M, Ebner A, Hinterdorfer P, Vitkov L, Hannig M, Kienberger F and Schilcher K (2009), "Examination of Native and Carbamide Peroxide-bleached Human Tooth Enamel by Atomic Force Microscopy", Ultrastructural Pathology., September, 2009. Vol. 33, pp. 189-196.
BibTeX:
@article{2009_Mahringer,
  author = {C. Mahringer and M. Füreder and M. Kastner and A. Ebner and P. Hinterdorfer and L. Vitkov and M. Hannig and F. Kienberger and K. Schilcher},
  title = {Examination of Native and Carbamide Peroxide-bleached Human Tooth Enamel by Atomic Force Microscopy},
  journal = {Ultrastructural Pathology},
  year = {2009},
  volume = {33},
  pages = {189-196}
}
Malik MM, Heinzl C and Gröller E (2009), "Computation and Visualization of Fabrication Artifacts", Journal of WSCG., February, 2009. Vol. 17(1), pp. 17-24.
BibTeX:
@article{2009_Malik,
  author = {M. M. Malik and C. Heinzl and E. Gröller},
  title = {Computation and Visualization of Fabrication Artifacts},
  journal = {Journal of WSCG},
  year = {2009},
  volume = {17},
  number = {1},
  pages = {17-24}
}
Plank B, Kastner J, Schneider R and Busch R (2009), "Characterisation of porosities in sinter-metalls by X-ray computed tomography - Example selective laser sintering", In Proceedings DGZfP annual conference 2009. Münster, Germany, May, 2009. , pp. 810-816.
BibTeX:
@inproceedings{2009_Plank,
  author = {B. Plank and J. Kastner and R. Schneider and R. Busch},
  title = {Characterisation of porosities in sinter-metalls by X-ray computed tomography - Example selective laser sintering},
  booktitle = {Proceedings DGZfP annual conference 2009},
  year = {2009},
  pages = {810-816}
}
Reiter M, Malik MM, Heinzl C, Salaberger D, Gröller E, Lettenbauer H and Kastner J (2009), "Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool", In Proccedings of 8th International Conference for Quality Control by Artificial Vision. Wels, Austria, May, 2009.
BibTeX:
@inproceedings{2009_Reiter,
  author = {M. Reiter and M. M. Malik and C. Heinzl and D. Salaberger and E. Gröller and H. Lettenbauer and J. Kastner},
  title = {Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool},
  booktitle = {Proccedings of 8th International Conference for Quality Control by Artificial Vision},
  year = {2009}
}
Salaberger D and Darmstädter B (2009), "Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns.", In Conference on Interdisciplinary Musicology (CIM09). Paris, France, October, 2009.
BibTeX:
@inproceedings{2009_Salaberger,
  author = {D. Salaberger and B. Darmstädter},
  title = {Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns.},
  booktitle = {Conference on Interdisciplinary Musicology (CIM09)},
  year = {2009}
}
Zauner G and Harrer B (2009), "Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen", In Proceedings of the 3rd Symposium of Austrian Universities of Applied Sciences. Fachhochschule Kärnten, Villach, Austria, April, 2009. , pp. 5.
BibTeX:
@inproceedings{2009_Zauner,
  author = {G. Zauner and B. Harrer},
  title = {Bildsegmentierung mittels Multiresolution-Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen},
  booktitle = {Proceedings of the 3rd Symposium of Austrian Universities of Applied Sciences},
  year = {2009},
  pages = {5}
}
Zhu R, Ebner A, Kastner M, Preiner J, Howorka S and Hinterdorfer P (2009), "Topography and Recognition Imaging of Protein-Patterned Surfaces Generated by AFM Nanolithography", ChemPhysChem., January, 2009.
BibTeX:
@article{2009_Zhu,
  author = {R. Zhu and A. Ebner and M. Kastner and J. Preiner and S. Howorka and P. Hinterdorfer},
  title = {Topography and Recognition Imaging of Protein-Patterned Surfaces Generated by AFM Nanolithography},
  journal = {ChemPhysChem},
  year = {2009}
}
Artelsmair H, Kienberger F, Tinazli A, Schlapak R, Zhu R, Preiner J, Wruss J, Kastner M, Saucedo-Zeni N, hoelzl M, Rankl C, Baumgartner W, Howorka S, Blaas D, Gruber H, Tampe R and Hinterdorfer P (2008), "Atomic force microscopy-derived nanoscale chip for the detection of human pathogenic viruses.", Small., January, 2008.
BibTeX:
@article{2008_Artelsmair,
  author = {H. Artelsmair and F. Kienberger and A. Tinazli and R. Schlapak and R. Zhu and J. Preiner and J. Wruss and M. Kastner and N. Saucedo-Zeni and M. hoelzl and C. Rankl and W. Baumgartner and S. Howorka and D. Blaas and H. Gruber and R. Tampe and P. Hinterdorfer},
  title = {Atomic force microscopy-derived nanoscale chip for the detection of human pathogenic viruses.},
  journal = {Small},
  year = {2008}
}
Bouzakis KD, Efstathiou K, Salaberger D and Kastner J (2008), "Design and manufacturing aspects of a vaginal speculum of antiquity as investigated by computed tomographies", JOURNAL OF ARCHAEOLOGICAL SCIENCE., January, 2008. Vol. 35(1), pp. 633-642.
BibTeX:
@article{2008_Bouzakis,
  author = {K. D. Bouzakis and K. Efstathiou and D. Salaberger and J. Kastner},
  title = {Design and manufacturing aspects of a vaginal speculum of antiquity as investigated by computed tomographies},
  journal = {JOURNAL OF ARCHAEOLOGICAL SCIENCE},
  year = {2008},
  volume = {35},
  number = {1},
  pages = {633-642}
}
Chyba B, Mantler M and Reiter M (2008), "Monte Carlo Simulation of Projections in Computed Tomography", Powder Diffraction Journal. Vol. 23(2), pp. 150-153.
BibTeX:
@article{2008_Chyba,
  author = {B. Chyba and M. Mantler and M. Reiter},
  title = {Monte Carlo Simulation of Projections in Computed Tomography},
  journal = {Powder Diffraction Journal},
  year = {2008},
  volume = {23},
  number = {2},
  pages = {150-153}
}
Darmstädter B and Salaberger D (2008), "First results of 3D-CT analysis of wind instruments of the Collection of Historic Musical Instruments Vienna", In Technological Studies. , pp. 108-139.
BibTeX:
@incollection{2008_Darmstaedter,
  author = {B. Darmstädter and D. Salaberger},
  title = {First results of 3D-CT analysis of wind instruments of the Collection of Historic Musical Instruments Vienna},
  booktitle = {Technological Studies},
  year = {2008},
  pages = {108-139},
  edition = {5}
}
Dvorak G, Gruber R, Salaberger D and Zanoni G (2008), "Trabecular Bone Structures in", JOURNAL OF DENTAL RESEARCH., September, 2008. Vol. 87(9), pp. 866-870.
BibTeX:
@article{2008_Dvorak,
  author = {G. Dvorak and R. Gruber and D. Salaberger and G. Zanoni},
  title = {Trabecular Bone Structures in},
  journal = {JOURNAL OF DENTAL RESEARCH},
  year = {2008},
  volume = {87},
  number = {9},
  pages = {866-870}
}
Harrer B, Kastner J, Winkler W and Degischer H (2008), "Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography", In The 17th World Conference on Non-destructive Testing and Exhibition. Shanghai, China, October, 2008. , pp. 7.
BibTeX:
@inproceedings{2008_Harrer,
  author = {B. Harrer and J. Kastner and W. Winkler and H. Degischer},
  title = {Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography},
  booktitle = {The 17th World Conference on Non-destructive Testing and Exhibition},
  year = {2008},
  pages = {7}
}
Harrer B, Plank B, Moore D, Kastner J and Degischer H (2008), "Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen", In Proceedings Industrielle Computertomografie Fachtagung 2008. Wels, Austria, February, 2008. , pp. 89-95.
BibTeX:
@inproceedings{2008_Harrera,
  author = {B. Harrer and B. Plank and D. Moore and J. Kastner and H. Degischer},
  title = {Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in Eisenwerkstoffen},
  booktitle = {Proceedings Industrielle Computertomografie Fachtagung 2008},
  year = {2008},
  pages = {89-95}
}
Harrer B, Gierl C, Danninger H, Schneider R and Kastner J (2008), "Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen", In Welser Werkstoff-Kolloquium 2008. Wels, Austria, May, 2008. , pp. 27-32.
BibTeX:
@inproceedings{2008_Harrerb,
  author = {B. Harrer and C. Gierl and H. Danninger and R. Schneider and J. Kastner},
  title = {Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen},
  booktitle = {Welser Werkstoff-Kolloquium 2008},
  year = {2008},
  pages = {27-32}
}
Heinzl C, Kastner J and Gröller E (2008), "Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion", In Proceedings Industrielle Computertomografie Fachtagung 2008. Wels, Austria, February, 2008. , pp. 151-156.
BibTeX:
@inproceedings{2008_Heinzl,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion},
  booktitle = {Proceedings Industrielle Computertomografie Fachtagung 2008},
  year = {2008},
  pages = {151-156}
}
Heinzl C, Kastner J and Gröller E (2008), "High Dynamic Range Imaging for Contrast Enhancement of X-ray Images", In Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms. Dresden, Germany, October, 2008. , pp. 8.
BibTeX:
@inproceedings{2008_Heinzla,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {High Dynamic Range Imaging for Contrast Enhancement of X-ray Images},
  booktitle = {Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms},
  year = {2008},
  pages = {8}
}
Heinzl C, Kastner J, Möller T and Gröller E (2008), "Statistical analysis of Multi-Material Components using Dual Energy CT", In Proceedings of Vision, Modeling, and Visualization 2008. Konstanz, Germany, Germany, October, 2008. , pp. 10.
BibTeX:
@inproceedings{2008_Heinzlb,
  author = {C. Heinzl and J. Kastner and T. Möller and E. Gröller},
  title = {Statistical analysis of Multi-Material Components using Dual Energy CT},
  booktitle = {Proceedings of Vision, Modeling, and Visualization 2008},
  year = {2008},
  pages = {10}
}
Hendorfer G, Mayr G, Puchberger F and Harrer B (2008), "Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung", In Industrielles Symposium Mechatronik 2008. Linz, Austria, October, 2008. , pp. 47-57.
BibTeX:
@inproceedings{2008_Hendorfer,
  author = {G. Hendorfer and G. Mayr and F. Puchberger and B. Harrer},
  title = {Thermographische Untersuchungen an metallischen Proben in Kombination mit induktiver Erwärmung},
  booktitle = {Industrielles Symposium Mechatronik 2008},
  year = {2008},
  pages = {47-57}
}
Hochegger M, Six J, Degischer H, Ilie S and Harrer B (2008), "Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation", In Thermomechanical Processing of Steel. Padua, Italy, September, 2008. , pp. 10.
BibTeX:
@inproceedings{2008_Hochegger,
  author = {M. Hochegger and J. Six and H. Degischer and S. Ilie and B. Harrer},
  title = {Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation},
  booktitle = {Thermomechanical Processing of Steel},
  year = {2008},
  pages = {10}
}
Kastner J and Salaberger D (2008), "High Resolution X-ray computed tomography for qualitative and quantitative characterisation of fibre reinforced polymers", In International Symposium on NDT in Aerospace. Fürth, Germany, December, 2008. , pp. 323-329.
BibTeX:
@inproceedings{2008_Kastner,
  author = {J. Kastner and D. Salaberger},
  title = {High Resolution X-ray computed tomography for qualitative and quantitative characterisation of fibre reinforced polymers},
  booktitle = {International Symposium on NDT in Aerospace},
  year = {2008},
  pages = {323-329}
}
Kastner J, Pfeifer F, Heinzl C and Freytag R (2008), "Pipeline for evaluation of CT-data of glass-fibre reinforced plastics", In DACH Conference 2008 DGZFP. St. Gallen, Switzerland, April, 2008. , pp. 8.
BibTeX:
@inproceedings{2008_Kastnera,
  author = {J. Kastner and F. Pfeifer and C. Heinzl and R. Freytag},
  title = {Pipeline for evaluation of CT-data of glass-fibre reinforced plastics},
  booktitle = {DACH Conference 2008 DGZFP},
  year = {2008},
  pages = {8}
}
Mahr G, Hinterhofer C and Kastner J (2008), "Finite element modelling of the feline antebrachium - comparison of stress in the intact bones and after extramedullary bridging of a mid-diaphyseal fracture", Vet. Med. Austria., October, 2008. Vol. 95(95), pp. 219-225.
BibTeX:
@article{2008_Mahr,
  author = {G. Mahr and C. Hinterhofer and J. Kastner},
  title = {Finite element modelling of the feline antebrachium - comparison of stress in the intact bones and after extramedullary bridging of a mid-diaphyseal fracture},
  journal = {Vet. Med. Austria},
  year = {2008},
  volume = {95},
  number = {95},
  pages = {219-225}
}
Mahringer C, Kastner M and Schilcher K (2008), "Scanning Force Microscopy on Native and Treated Tooth Enamel", In FH Science Day 2008, Linz. Linz, Austria, November, 2008. , pp. 116-122.
BibTeX:
@inproceedings{2008_Mahringer,
  author = {C. Mahringer and M. Kastner and K. Schilcher},
  title = {Scanning Force Microscopy on Native and Treated Tooth Enamel},
  booktitle = {FH Science Day 2008, Linz},
  year = {2008},
  pages = {116-122}
}
Mayr G, Hendorfer G, Puchberger F, Harrer B and Dietermayr B (2008), "Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie", In Tagungsband des 2. Forschungsforums der österreichischen Fachhochschulen. Wels, Austria, March, 2008. , pp. 347-353.
BibTeX:
@inproceedings{2008_Mayr,
  author = {G. Mayr and G. Hendorfer and F. Puchberger and B. Harrer and B. Dietermayr},
  title = {Schnelle und zerstörungsfreie Werkstoffprüfung bei Metallen durch Anwendung der Induktionsthermographie},
  booktitle = {Tagungsband des 2. Forschungsforums der österreichischen Fachhochschulen},
  year = {2008},
  pages = {347-353}
}
Pfeifer F, Kastner J and Freytag R (2008), "Method for three-dimensional evaluation and visualization of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography", In ''WCNDT Shanghai 2008''. Shanghai, China, October, 2008. , pp. 8.
BibTeX:
@inproceedings{2008_Pfeifer,
  author = {F. Pfeifer and J. Kastner and R. Freytag},
  title = {Method for three-dimensional evaluation and visualization of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography},
  booktitle = {''WCNDT Shanghai 2008''},
  year = {2008},
  pages = {8}
}
Plank B (2008), "Characterization of porosity in sintered metals with 3D X-ray computed tomography to determine optimal production parameters for selective laser melting". Thesis at: FH OÖ Fakultät Wels, Austria. , pp. 161.
BibTeX:
@techreport{2008_Plank,
  author = {B. Plank},
  title = {Characterization of porosity in sintered metals with 3D X-ray computed tomography to determine optimal production parameters for selective laser melting},
  school = {FH OÖ Fakultät Wels, Austria},
  year = {2008},
  pages = {161}
}
Reiter M, Kunzmann S, Lettenbauer H, Mantler M and Kastner J (2008), "SimCT - Modellierung und Simulation eines industriellen Röntgen 3D Computertomographie Systems", In Proceedings of FFH2008. Wels, Austria, March, 2008. , pp. 998-999.
BibTeX:
@inproceedings{2008_Reiter,
  author = {M. Reiter and S. Kunzmann and H. Lettenbauer and M. Mantler and J. Kastner},
  title = {SimCT - Modellierung und Simulation eines industriellen Röntgen 3D Computertomographie Systems},
  booktitle = {Proceedings of FFH2008},
  year = {2008},
  pages = {998-999}
}
Reiter M, Kunzmann S, Lettenbauer H, Chyba B, Mantler M and Kastner J (2008), "Simulation eines industriellen 3D Röntgen Computertomographen zur verbesserten Geometriebestimmung", In DACH Conference 2008 DGZFP. St. Gallen, Switzerland, April, 2008. , pp. 10-20.
BibTeX:
@inproceedings{2008_Reitera,
  author = {M. Reiter and S. Kunzmann and H. Lettenbauer and B. Chyba and M. Mantler and J. Kastner},
  title = {Simulation eines industriellen 3D Röntgen Computertomographen zur verbesserten Geometriebestimmung},
  booktitle = {DACH Conference 2008 DGZFP},
  year = {2008},
  pages = {10-20}
}
Reiter M, Weiss D, Lettenbauer H and Kastner J (2008), "Simulation of an industrial X-ray cone beam computed-tomography system", In Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms. Dresden, Germany, October, 2008.
BibTeX:
@inproceedings{2008_Reiterb,
  author = {M. Reiter and D. Weiss and H. Lettenbauer and J. Kastner},
  title = {Simulation of an industrial X-ray cone beam computed-tomography system},
  booktitle = {Proceedings of IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms},
  year = {2008}
}
Salaberger D, Kastner J, Stadlbauer W, Zitzenbacher G and Freytag R (2008), "Determination of diameter, length and three-dimensional distribution", In Proceedings of PPS-24. Salerno, Italy, June, 2008. , pp. 1.
BibTeX:
@inproceedings{2008_Salaberger,
  author = {D. Salaberger and J. Kastner and W. Stadlbauer and G. Zitzenbacher and R. Freytag},
  title = {Determination of diameter, length and three-dimensional distribution},
  booktitle = {Proceedings of PPS-24},
  year = {2008},
  pages = {1}
}
Salaberger D and Kastner J (2008), "X-Ray Computed Tomography analysis of Saliera and wooden instruments from Renaissance", In Proceedings of FFH2008. Wels, Austria, March, 2008. , pp. 341-346.
BibTeX:
@inproceedings{2008_Salabergera,
  author = {D. Salaberger and J. Kastner},
  title = {X-Ray Computed Tomography analysis of Saliera and wooden instruments from Renaissance},
  booktitle = {Proceedings of FFH2008},
  year = {2008},
  pages = {341-346}
}
Salaberger D and Kastner J (2008), "X-Ray CT of Saliera", In Research Forum. , pp. 341-346. Shaker Verlag.
BibTeX:
@incollection{2008_Salabergerb,
  author = {D. Salaberger and J. Kastner},
  editor = {J. Kastner},
  title = {X-Ray CT of Saliera},
  booktitle = {Research Forum},
  publisher = {Shaker Verlag},
  year = {2008},
  pages = {341-346}
}
Schamall D, Teschler-Nikola M, Tangl S and Salaberger D (2008), "Articulation despite damaged Articulationes: Syngnathia in Historic Skulls", In 17. European Meeting of the Paleopathology Association. Kopenhagen, Denmark, August, 2008. , pp. 1.
BibTeX:
@inproceedings{2008_Schamall,
  author = {D. Schamall and M. Teschler-Nikola and S. Tangl and D. Salaberger},
  title = {Articulation despite damaged Articulationes: Syngnathia in Historic Skulls},
  booktitle = {17. European Meeting of the Paleopathology Association},
  year = {2008},
  pages = {1}
}
Schöbel M, Harrer B and Degischer H (2008), "Multiscale tomography of diamond reinforced MMC for cooling", In Practical metallography. Jena, Germany, September, 2008. , pp. 337-342.
BibTeX:
@inproceedings{2008_Schoebel,
  author = {M. Schöbel and B. Harrer and H. Degischer},
  title = {Multiscale tomography of diamond reinforced MMC for cooling},
  booktitle = {Practical metallography},
  year = {2008},
  pages = {337-342}
}
Schuster C, Salaberger D and Kastner J (2008), "Computertomographie zur Visualisierung von Wasser auf Textilien", In Proceedings Industrielle Computertomografie Fachtagung 2008. Wels, Austria, February, 2008. , pp. 128-136.
BibTeX:
@inproceedings{2008_Schuster,
  author = {C. Schuster and D. Salaberger and J. Kastner},
  title = {Computertomographie zur Visualisierung von Wasser auf Textilien},
  booktitle = {Proceedings Industrielle Computertomografie Fachtagung 2008},
  year = {2008},
  pages = {128-136}
}
Stifter D, Schlotthauer E, Wiesauer K, Kastner J and Wurm M (2008), "Investigation of polymer and polymer/fibre composite materials with optical coherence tomography", MEASUREMENT SCIENCE & TECHNOLOGY., May, 2008. Vol. 19(74011), pp. 1-8.
BibTeX:
@article{2008_Stifter,
  author = {D. Stifter and E. Schlotthauer and K. Wiesauer and J. Kastner and M. Wurm},
  title = {Investigation of polymer and polymer/fibre composite materials with optical coherence tomography},
  journal = {MEASUREMENT SCIENCE & TECHNOLOGY},
  year = {2008},
  volume = {19},
  number = {74011},
  pages = {1-8}
}
Stifter D, Kastner J, Schlotthauer E, Breuer E and Wiesauer K (2008), "Optical Coherence Tomography and X-Ray CT for characterisation of polymeric systems", In Proceedings Industrielle Computertomografie Fachtagung 2008. Wels, Austria, February, 2008. , pp. 23-29.
BibTeX:
@inproceedings{2008_Stiftera,
  author = {D. Stifter and J. Kastner and E. Schlotthauer and E. Breuer and K. Wiesauer},
  title = {Optical Coherence Tomography and X-Ray CT for characterisation of polymeric systems},
  booktitle = {Proceedings Industrielle Computertomografie Fachtagung 2008},
  year = {2008},
  pages = {23-29}
}
Traxler H, Harrer B, Friedrich T, Schedler B and Kastner J (2008), "Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik", In Proceedings Industrielle Computertomografie Fachtagung 2008. Wels, Austria, February, 2008. , pp. 29-36.
BibTeX:
@inproceedings{2008_Traxler,
  author = {H. Traxler and B. Harrer and T. Friedrich and B. Schedler and J. Kastner},
  title = {Anwendung der Computertomographie auf Komponenten der Kernfusionstechnik},
  booktitle = {Proceedings Industrielle Computertomografie Fachtagung 2008},
  year = {2008},
  pages = {29-36}
}
Traxler H, Gerzoskovitz S, Sigl L, Harrer B and Kastner J (2008), "Pulsed Thermography of CFC Monoblock Divertor Components", In 25th Symposion on Fusion Technology -SOFT 2008. Rostock, Germany, September, 2008. , pp. 8.
BibTeX:
@inproceedings{2008_Traxlera,
  author = {H. Traxler and S. Gerzoskovitz and L. Sigl and B. Harrer and J. Kastner},
  title = {Pulsed Thermography of CFC Monoblock Divertor Components},
  booktitle = {25th Symposion on Fusion Technology -SOFT 2008},
  year = {2008},
  pages = {8}
}
Vitkov L, Kastner M, Kienberger F, Hinterdorfer P, Schilcher K and Grunert I (2008), "Correlations Between AFM and SEM Imaging of Acid-etched Tooth Enamel", Ultrastructural Pathology., February, 2008. Vol. 32(1), pp. 1-5.
BibTeX:
@article{2008_Vitkov,
  author = {L. Vitkov and M. Kastner and F. Kienberger and P. Hinterdorfer and K. Schilcher and I. Grunert},
  title = {Correlations Between AFM and SEM Imaging of Acid-etched Tooth Enamel},
  journal = {Ultrastructural Pathology},
  year = {2008},
  volume = {32},
  number = {1},
  pages = {1-5}
}
Witteveen W, Irschik H and Plank A (2008), "An efficient mode based approach for the dynamic analysis of jointed and local damped structures: Joint Interface Modes", In Proceedings of ISMA 2008. Leuven, Belgium, September, 2008.
BibTeX:
@inproceedings{2008_Witteveen,
  author = {W. Witteveen and H. Irschik and A. Plank},
  title = {An efficient mode based approach for the dynamic analysis of jointed and local damped structures: Joint Interface Modes},
  booktitle = {Proceedings of ISMA 2008},
  year = {2008}
}
Harrer B, Kastner J, Kottar A and Degischer H (2007), "Detection of inhomogenieties in cast material using x-ray computer tomography", In DGZFP Yearly Conference 2007. Fürth, Germany, May, 2007. , pp. 10.
BibTeX:
@inproceedings{2007_Harrer,
  author = {B. Harrer and J. Kastner and A. Kottar and H. Degischer},
  title = {Detection of inhomogenieties in cast material using x-ray computer tomography},
  booktitle = {DGZFP Yearly Conference 2007},
  year = {2007},
  pages = {10}
}
Harrer B, Winkler W, Pissenberger E, Kastner J and Degischer H (2007), "X-ray computer tomography of inhomogenities in aluminium and steel", In progress in metallography. Bremen, Germany, September, 2007. , pp. 131-136.
BibTeX:
@inproceedings{2007_Harrera,
  author = {B. Harrer and W. Winkler and E. Pissenberger and J. Kastner and H. Degischer},
  title = {X-ray computer tomography of inhomogenities in aluminium and steel},
  booktitle = {progress in metallography},
  year = {2007},
  pages = {131-136}
}
Heinzl C, Kastner J, Georgi B and Lettenbauer H (2007), "Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology", In Proceedings of International Symposium on Digital industrial Radiology and Computed Tomography 2007. Lyon, France, June, 2007. , pp. 8.
BibTeX:
@inproceedings{2007_Heinzl,
  author = {C. Heinzl and J. Kastner and B. Georgi and H. Lettenbauer},
  title = {Comparison of surface detection methods to evaluate cone-beam computed tomography data for three dimensional metrology},
  booktitle = {Proceedings of International Symposium on Digital industrial Radiology and Computed Tomography 2007},
  year = {2007},
  pages = {8}
}
Heinzl C, Kastner J and Gröller E (2007), "Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT", IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS., October, 2007. Vol. 13(6), pp. 1520-1528.
BibTeX:
@article{2007_Heinzla,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT},
  journal = {IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS},
  year = {2007},
  volume = {13},
  number = {6},
  pages = {1520-1528}
}
Hendorfer G, Mayr G and Schlotthauer E (2007), "Pulsed Thermography applied to Components with Complex Shape", In American Institute of Physics Conference Proceedings, Vol. 1340. Golden, CO, United States of America, July, 2007. , pp. 950-957.
BibTeX:
@inproceedings{2007_Hendorfer,
  author = {G. Hendorfer and G. Mayr and E. Schlotthauer},
  title = {Pulsed Thermography applied to Components with Complex Shape},
  booktitle = {American Institute of Physics Conference Proceedings, Vol. 1340},
  year = {2007},
  pages = {950-957}
}
Kastner J, Angermaier D, Schlotthauer E, Zitzenbacher G and Stadlbauer W (2007), "µ- and nano-computed tomography for the 3-dimensional characterisation of composites", In Proceedings of the Industrial Symposium Mechatronics 2007 on Sensorics. Linz, Austria, October, 2007. , pp. 71-79.
BibTeX:
@inproceedings{2007_Kastner,
  author = {J. Kastner and D. Angermaier and E. Schlotthauer and G. Zitzenbacher and W. Stadlbauer},
  title = {µ- and nano-computed tomography for the 3-dimensional characterisation of composites},
  booktitle = {Proceedings of the Industrial Symposium Mechatronics 2007 on Sensorics},
  year = {2007},
  pages = {71-79}
}
Kastner J, Salaberger D and Heinzl C (2007), "Measurement of microparts and reproducible surface extraction", In PTB-Report Geometrymeasurement by industrial CT. Braunschweig, Germany, March, 2007. , pp. 181-192.
BibTeX:
@inproceedings{2007_Kastnera,
  author = {J. Kastner and D. Salaberger and C. Heinzl},
  title = {Measurement of microparts and reproducible surface extraction},
  booktitle = {PTB-Report Geometrymeasurement by industrial CT},
  year = {2007},
  pages = {181-192}
}
Kastner J, Salaberger D, Grabner M and Mehofer M (2007), "Micro-X-Ray Computed Tomography: A non-destructive method for archaeology", Archaeology Austria., May, 2007. Vol. 18(1), pp. 60-64.
BibTeX:
@article{2007_Kastnerb,
  author = {J. Kastner and D. Salaberger and M. Grabner and M. Mehofer},
  title = {Micro-X-Ray Computed Tomography: A non-destructive method for archaeology},
  journal = {Archaeology Austria},
  year = {2007},
  volume = {18},
  number = {1},
  pages = {60-64}
}
Kastner J, Schlotthauer E, Breuer E and Stifter D (2007), "Optical Coherence Tomography and 3D X-ray Computed Tomography", MP Materials Testing., April, 2007. Vol. 49(4), pp. 177-183.
BibTeX:
@article{2007_Kastnerc,
  author = {J. Kastner and E. Schlotthauer and E. Breuer and D. Stifter},
  title = {Optical Coherence Tomography and 3D X-ray Computed Tomography},
  journal = {MP Materials Testing},
  year = {2007},
  volume = {49},
  number = {4},
  pages = {177-183}
}
Kastner J, Angermaier D, Zitzenbacher G, Schlotthauer E and Stadlbauer W (2007), "Quantitative Measurement of fibre length and distribution in fibre reinforced polymers", In DGZFP Yearly Conference 2007. Fürth, Germany, May, 2007. , pp. 345-352.
BibTeX:
@inproceedings{2007_Kastnerd,
  author = {J. Kastner and D. Angermaier and G. Zitzenbacher and E. Schlotthauer and W. Stadlbauer},
  title = {Quantitative Measurement of fibre length and distribution in fibre reinforced polymers},
  booktitle = {DGZFP Yearly Conference 2007},
  year = {2007},
  pages = {345-352}
}
Mantler M, Chyba B and Reiter M (2007), "Monte-Carlo simulation of projections in computed tomography", In Proceedings of Denver X-Ray Conference.
BibTeX:
@inproceedings{2007_Mantler,
  author = {M. Mantler and B. Chyba and M. Reiter},
  title = {Monte-Carlo simulation of projections in computed tomography},
  booktitle = {Proceedings of Denver X-Ray Conference},
  year = {2007}
}
Salaberger D and Kastner J (2007), "Non- destructive testing using 3D- x-ray Computed Tomography", In Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen. Fachhochschule Salzburg, Campus Urstein, Austria, April, 2007. , pp. 1.
BibTeX:
@inproceedings{2007_Salaberger,
  author = {D. Salaberger and J. Kastner},
  title = {Non- destructive testing using 3D- x-ray Computed Tomography},
  booktitle = {Tagungsband des ersten Forschungsforum der österreichischen Fachhochschulen},
  year = {2007},
  pages = {1}
}
Windisch G, Salaberger D, Rosmarin W and Kastner J (2007), "A model for clubfoot based on micro-CT data", JOURNAL OF ANATOMY., June, 2007. Vol. 210(6), pp. 761-766.
BibTeX:
@article{2007_Windisch,
  author = {G. Windisch and D. Salaberger and W. Rosmarin and J. Kastner},
  title = {A model for clubfoot based on micro-CT data},
  journal = {JOURNAL OF ANATOMY},
  year = {2007},
  volume = {210},
  number = {6},
  pages = {761-766}
}
Grabner M, Kastner J, Reschreiter H and Salaberger D (2006), "Dendrochronological dating of wooden artefacts from Hallstatt using x-ray-CT", In Studies on cultural history of Upper Austria. Linz, Austria, November, 2006. , pp. 99-107.
BibTeX:
@inproceedings{2006_Grabner,
  author = {M. Grabner and J. Kastner and H. Reschreiter and D. Salaberger},
  title = {Dendrochronological dating of wooden artefacts from Hallstatt using x-ray-CT},
  booktitle = {Studies on cultural history of Upper Austria},
  year = {2006},
  pages = {99-107}
}
Heinzl C, Kastner J and Gröller E (2006), "Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography", In Proceedings of European Conference on Non-Destructive Testing 2006. Berlin, Germany, September, 2006. , pp. 8.
BibTeX:
@inproceedings{2006_Heinzl,
  author = {C. Heinzl and J. Kastner and E. Gröller},
  title = {Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography},
  booktitle = {Proceedings of European Conference on Non-Destructive Testing 2006},
  year = {2006},
  pages = {8}
}
Heinzl C, Klingesberger R, Gröller E and Kastner J (2006), "Robust surface detection for variance comparison", In Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation. Lissabon, Portugal, May, 2006. , pp. 75-82.
BibTeX:
@inproceedings{2006_Heinzla,
  author = {C. Heinzl and R. Klingesberger and E. Gröller and J. Kastner},
  title = {Robust surface detection for variance comparison},
  booktitle = {Proceedings of Eurographics/IEEE VGTC Symposium on Visualisation},
  year = {2006},
  pages = {75-82}
}
Kastner J, Heim D and Salaberger D (2006), "Advanced applications of computed tomography by combination of different methods", In Proceedings of European Conference on Non-Destructive Testing 2006. Berlin, Germany, September, 2006. , pp. 12.
BibTeX:
@inproceedings{2006_Kastner,
  author = {J. Kastner and D. Heim and D. Salaberger},
  title = {Advanced applications of computed tomography by combination of different methods},
  booktitle = {Proceedings of European Conference on Non-Destructive Testing 2006},
  year = {2006},
  pages = {12}
}
Reiter M (2006), "Multiskalen Bildverarbeitungsmethoden zur Rauschunterdrückung an industriellen Computer-Tomographie Daten". Thesis at: FH OÖ Fakultät Wels, Österreich.
BibTeX:
@mastersthesis{2006_Reiter,
  author = {M. Reiter},
  title = {Multiskalen Bildverarbeitungsmethoden zur Rauschunterdrückung an industriellen Computer-Tomographie Daten},
  school = {FH OÖ Fakultät Wels, Österreich},
  year = {2006}
}
Tomic B, Harrer B, Kottar A, Degischer H, Zeipper L and Kastner J (2006), "Characterisation of graphite particles in GJS", In progress in metallography. Leoben, Austria, September, 2006. , pp. 113-120.
BibTeX:
@inproceedings{2006_Tomic,
  author = {B. Tomic and B. Harrer and A. Kottar and H. Degischer and L. Zeipper and J. Kastner},
  title = {Characterisation of graphite particles in GJS},
  booktitle = {progress in metallography},
  year = {2006},
  pages = {113-120}
}
Zauner G, Reiter M and Kastner J (2006), "Denoising of Computed Tomography Images using Multiresolution Based Methods", In Proceedings of European Conference on Non-Destructive Testing 2006. Berlin, Germany, September, 2006. , pp. 9.
BibTeX:
@inproceedings{2006_Zauner,
  author = {G. Zauner and M. Reiter and J. Kastner},
  title = {Denoising of Computed Tomography Images using Multiresolution Based Methods},
  booktitle = {Proceedings of European Conference on Non-Destructive Testing 2006},
  year = {2006},
  pages = {9}
}
Zauner G, Harrer B, Angermaier D and Kastner J (2005), "Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography", In Optical Measurement Systems for Industrial Inspection. Munich, Germany, June, 2005. , pp. 10.
BibTeX:
@inproceedings{2005_Zauner,
  author = {G. Zauner and B. Harrer and D. Angermaier and J. Kastner},
  title = {Multiscale segmentation method for small inclusion detection in 3D industrial computed tomography},
  booktitle = {Optical Measurement Systems for Industrial Inspection},
  year = {2005},
  pages = {10}
}
Created by JabRef on 15/01/2019.
Aktuelle Seite: Home Forschung Publikationen Bibliography